Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


Bhavicp

125 posts

Master Geek


#111849 16-Nov-2012 17:31
Send private message

Hi all,

I've just switched to Orcon Genius (Unlimited of course) from Slingshot, today and am having problems using my switch with the Genius router.

Simply put, I don't seem to get any Internet access if i plug my computer into the switch. It used to work fine with my old TPL modem and I'm wondering if there's anything special i need to do to get it to work with Genius.

It's a simple TP-Link Gigabit switch (TL-SG1005D). I use it to get gigabit speeds (or so between my media server -> desktop PC.

Filter this topic showing only the reply marked as answer Create new topic
sbiddle
29218 posts

Uber Geek

Moderator
Trusted
Biddle Corp
Lifetime subscriber

  #718423 16-Nov-2012 18:41
Send private message

Shouldn't be anything special. I assume that you do have the switch plugged into one of the LAN ports, and not the port designated for WAN? <br />

Bhavicp

125 posts

Master Geek


  #718425 16-Nov-2012 18:46
Send private message

sbiddle: Shouldn't be anything special. I assume that you do have the switch plugged into one of the LAN ports, and not the port designated for WAN? &amp;lt;br /&amp;gt;
That's what i thought, I plugged it into LAN1, but it doesn't seem to work. I'll play around with it more.

Edit: Nothing seems to show up in the DHCP list at all.

Edit2: I'm running 1202 version, I've seen people on the forum talk about 14XX as well, But icouldn't find any instructions to upgrade ie where to find updated firmware, does anyone know?

 
 
 
 


gehenna
6515 posts

Uber Geek

Moderator
Trusted
Lifetime subscriber

  #718498 16-Nov-2012 20:59
Send private message

Does the genius recognise that the switch is plugged into one of its ports?

Bhavicp

125 posts

Master Geek


  #718505 16-Nov-2012 21:22
Send private message

gehenna: Does the genius recognise that the switch is plugged into one of its ports?


Oddly, there's no LAN indicators on the modem itself, or even lights on the ports (even for the working one). I checked the admin/configure page for the modem, and I can't see anything in the status or otherwise pages to actually check if it's finding a link.


ubergeeknz
3344 posts

Uber Geek

Trusted
Vocus

  #718512 16-Nov-2012 21:44
Send private message

If you're not getting link, that will be a problem.

The switch says it's auto uplink sensing, so there should be no need for a crossover cable or anything fancy.

I know we have staff etc using switches on their Genius routers OK.  

Tried a different cable?  

Also watch out that sometimes the sockets on the Genius can be very "stiff" (depending on the cable) and sometimes require a fair bit of force before the cable will click into place.

Try a laptop etc. on the same ports on the Genius AND the switch.  You should at least get a link light.

Let us know how you get on.

Bhavicp

125 posts

Master Geek


  #718538 16-Nov-2012 23:05
Send private message

ubergeeknz: If you're not getting link, that will be a problem.

The switch says it's auto uplink sensing, so there should be no need for a crossover cable or anything fancy.

I know we have staff etc using switches on their Genius routers OK.  

Tried a different cable?  

Also watch out that sometimes the sockets on the Genius can be very "stiff" (depending on the cable) and sometimes require a fair bit of force before the cable will click into place.

Try a laptop etc. on the same ports on the Genius AND the switch.  You should at least get a link light.

Let us know how you get on.


Thanks for replying. Oddly, there's no Link light on even the cable which IS working (Ie the one to the computer I'm on right now). Could it be a faulty genius modem if there is indeed supposed to be a link light?

I'll try a laptop and another PC tomorrow morning see if there's any further 

Edit: There's a link light on the switch side. But nothing on the Orcon side (As mentioned above, at all)

ubergeeknz
3344 posts

Uber Geek

Trusted
Vocus

  #718547 16-Nov-2012 23:16
Send private message

I see, did not realise you were getting link light on the switch side.

There is only a single LAN light on the Genius, it's an icon with 2 PC's on it, should be lit up blue if you have anything plugged into any LAN ports.

Having said that, if a laptop works on any given LAN port then so should your switch.

 
 
 
 


Sounddude
I fix stuff!
1843 posts

Uber Geek

Trusted
Vocus
Lifetime subscriber

  #718639 17-Nov-2012 09:39
Send private message

The Genius modem is only 10/100mbit.

Not sure on your switch specs, but its its expecting 1Gig ports then that could explain why laptops work and the Genius doesn't.


Sounddude
I fix stuff!
1843 posts

Uber Geek

Trusted
Vocus
Lifetime subscriber

  #718641 17-Nov-2012 09:40
Send private message

Sounddude: The Genius modem is only 10/100mbit.

Not sure on your switch specs, but if its expecting 1Gig ports then that could explain why laptops work and the Genius doesn't.

Have you tried any other ports on the genius modem? Ports 1, 2 and 3 are LAN ports (port 4 is reserved for UFB uplink)


Bhavicp

125 posts

Master Geek


  #718651 17-Nov-2012 10:14
Send private message

Sounddude: The Genius modem is only 10/100mbit.

Not sure on your switch specs, but its its expecting 1Gig ports then that could explain why laptops work and the Genius doesn't.



My old modem was also 100 and it did work.

Edit: Just tried a different port and then rebooted the modem. It seems to be working now! 

Thanks for the help guys.

Chrisbexsta
85 posts

Master Geek


  #725064 30-Nov-2012 10:51
Send private message

Log into your Genius Modem 10.1.1.1 and check where it says Modem is currently configured for: that it is not set to UFB if you are on broadband over copper as the UFB option turns LAN port 1 into a wan port if you have fibre which is the port the run a ethernet cable from the ONT to Genius unit. If that is not the case then i would recomend contacting orcon as your unit is possibly faulty.

ubergeeknz
3344 posts

Uber Geek

Trusted
Vocus

  #725067 30-Nov-2012 10:59
Send private message

Chrisbexsta: Log into your Genius Modem 10.1.1.1 and check where it says Modem is currently configured for: that it is not set to UFB if you are on broadband over copper as the UFB option turns LAN port 1 into a wan port if you have fibre which is the port the run a ethernet cable from the ONT to Genius unit. If that is not the case then i would recomend contacting orcon as your unit is possibly faulty.


Hi Chris,

Thanks for the input.  I believe the OP has solved their issue already, but I wanted to clarify a couple of points.

In fact LAN port 4 is used a WAN port if UFB mode is set.  On new modems shipping there is a blank inserted in this port marked "Reserved for Fibre" - which can be removed for a UFB connection.

Also, UFB mode will automatically fallback to ADSL if UFB connection is not present, so it's best to have it set to UFB regardless (it is by default in the newer firmwares).  This way if/when you get UFB in the future, the Genius will be ready-to-go and you won't need to change a thing.

Hope that clarifies :)

Cheers,

Dan

Chrisbexsta
85 posts

Master Geek


  #725069 30-Nov-2012 11:03
Send private message

I was always thinking it was LAN 1 because when they upgraded mine ages ago i had to change the ethernet cable from 1 to 2 as 1 stopped working. I just tried LAN 1 on my unit and it is working must have been a bug with older firmware or something odd.

Filter this topic showing only the reply marked as answer Create new topic




News »

Amazon introduces new Echo devices
Posted 25-Sep-2020 11:56


Mad Catz introduces new S.T.R.I.K.E. 13 Mechanical Gaming Keyboard
Posted 25-Sep-2020 11:34


Vodafone NZ upgrades international submarine network
Posted 25-Sep-2020 09:09


Jabra announces wireless noise-cancelling airbuds, upgrade existing model
Posted 24-Sep-2020 14:43


Nokia 3.4 to be available in New Zealand
Posted 24-Sep-2020 14:34


HP announces new HP ENVY laptops aimed at content creators
Posted 24-Sep-2020 14:02


Logitech introduce MX Anywhere 3
Posted 21-Sep-2020 21:17


Countdown unveils contactless shopping with new Scan&Go tech
Posted 21-Sep-2020 09:48


HP unveils new innovations for businesses adapting to rapidly evolving workstyles and workforces
Posted 17-Sep-2020 15:36


GoPro launches new HERO9 Black camera
Posted 17-Sep-2020 09:45


Telecommunications industry launches new 5G Facts website
Posted 17-Sep-2020 07:56


New Zealand ranks 3rd in world in GSMA index
Posted 15-Sep-2020 10:13


Trend Micro Security Suite adds web monitoring to prevent identity theft
Posted 14-Sep-2020 15:37


NVIDIA to acquire Arm for US$ 40 billion
Posted 14-Sep-2020 12:27


Epson launches its next gen A3+ colour EcoTank multi-function printer
Posted 10-Sep-2020 16:08



Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Support Geekzone »

Our community of supporters help make Geekzone possible. Click the button below to join them.

Support Geezone on PressPatron



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.

Alternatively, you can receive a daily email with Geekzone updates.