[Snap] FritzBox Customer LAN Settings

Forums › 2degrees (including Slingshot, Orcon, Flip, Stuff Fibre, MyRepublic, 2talk and Vocus) › [Snap] FritzBox Customer LAN Settings

Oblivian

7345 posts

Uber Geek
+1 received by user: 2117

ID Verified

#115858 9-Apr-2013 14:33

I take it theres no issue with customising local network settings and WLAN security/names etc on the fritz's?

Ours has turned up already awaiting install date at new premesis, and I'd love to have a go at it and configure Static leases, IP ranges and PortForwarding etc to similarly match my current setup so cutover is seamless.

I see it's setup with account details (from signup?), Vlan10 and the PPoE Redirect on LAN1 out-of-box which is fairly simple to replicate should things need to be reset.

Be even more awesome if it can easily have the ADSL enabled and be able to use on my existing <other provider> connection.. anyone managed to do this? (or are they magical backdoor locked down so you cant) ;)

petercad

120 posts

Master Geek
+1 received by user: 15

#795726 9-Apr-2013 16:42

I have a FritzBox, it's not locked at all, once you have it, it's yours to do whatever you wish
Plenty of online help to do what you want, just search.

I use one on another provider (Not Snap), and it's 100% perfect!

sidefx

3775 posts

Uber Geek
+1 received by user: 1295

Trusted

#795734 9-Apr-2013 16:50

I seem to remember mine worked fine for ADSL (the day before VDSL was provisioned, I think)

You can backup the settings using System -> Save Settings. Then play to your hearts content ;-)

"I was born not knowing and have had only a little time to change that here and there." | Octopus Energy | Sharesies
- Richard Feynman

Oblivian

7345 posts

Uber Geek
+1 received by user: 2117

ID Verified

#795747 9-Apr-2013 17:30

Heh confession. I tried a backup then played with it a bit. Could get dsl sync but no ppp login (DAMMIT)

Went to go back to backup... ruh roh, what it saved was a htm saying unsupportdd format when the browser (tablet) tried to save it lol... DOH

That was the only retarded move i did. Got a bit of a brain so hopefully sweet to fix it via phone if it doesnt go come ufb times lol

Pinkfish

49 posts

Geek
+1 received by user: 1

#797355 10-Apr-2013 19:41

Oblivian: Heh confession. I tried a backup then played with it a bit. Could get dsl sync but no ppp login (DAMMIT)

Went to go back to backup... ruh roh, what it saved was a htm saying unsupportdd format when the browser (tablet) tried to save it lol... DOH

That was the only retarded move i did. Got a bit of a brain so hopefully sweet to fix it via phone if it doesnt go come ufb times lol

If the fritz has been configured for UFB, and you've reconfigured it for ADSL, then try putting VDSL settings in instead of ADSL. It should work fine at that point and allow you to get PPP.

Oblivian

7345 posts

Uber Geek
+1 received by user: 2117

ID Verified

#797358 10-Apr-2013 19:50

As it turns out, another thread buried here helped...

Theres a bug with them. Switching between modes requires a factory reset once PPPoE or ADSL is set :)

Factory reset, reconfigure and bobs uncle. Made sure I saved the config before doing so this time.. That way the remote access credentials for support etc still there