[Snap] Snap VOIP + Linksys PAP2T

Forums › 2degrees (including Slingshot, Orcon, Flip, Stuff Fibre, MyRepublic, 2talk and Vocus) › [Snap] Snap VOIP + Linksys PAP2T

yumcimil

177 posts

Master Geek

#116228 22-Apr-2013 18:57

I've been having great difficulties with dialplans and Snap Plus on this linksys ATA. I've tried various ones that have been posted here, but no matter what, I can't dial anything that's not a cellphone. It receives calls okay, and can dial cellphones (at least 021 numbers) just fine. I've checked that the Fritzbox functions correctly with the phone, but the rest of its functionality isn't useful to me.

Current plan is

(021[3-9]xxxxx|0[34679][2-9]xxxxxx), which I believe should either ring VF mobiles, or NZ landlines. If I call a landline, the answering line rings for a fraction of a second, then goes silent - from the ATA end, it never rings, just goes straight to a series of beeps (disconnected, I think?)

Any assistance would be greatly appreciated.

sbiddle

30853 posts

Uber Geek

Retired Mod

Trusted

Biddle Corp

Lifetime subscriber

#803875 22-Apr-2013 19:20

That dialplan is correct.

I could list probably a dozen things right now that it could be. Just because something speaks SIP doesn't mean it's automaticlaly compatible with every SIP device out there unless you have the settings correct. There are around 30 settings on a Cisco ATA that need changing to have optimal settings for most environments.

My understanding is Snap don't provide VoIP support for any hardware not supplied by them, so you'll be on your own. A full SIP debug would clearly show what's going on. First thing I'd look at would be codecs however..

yumcimil

177 posts

Master Geek

#803879 22-Apr-2013 19:29

What are your hourly rates for consulting? Fixing this isn't fun for me in any way. :)

kfella2000

495 posts

Ultimate Geek

#805101 24-Apr-2013 19:32

Write down your dial plan in case this doesnt work and replace it with this one. This is the dial plan for a pap2t on 2talk

([2-9]xxxxxx|0[34679][2-9]xxxxxx|0210xxxxxxx|021[12]xxxxxx|021[3-9]xxxxx|02[0279]xxxxxxx|0204xxxxxxx|0240xxxxxx|024[1-9]xxxxxxx|0282[4-5]xxxxxx|050xxxxxxx|070xxxxxxx|080xxxxxxx|00xxxxxxx.|01[08]|017xx|12[356]|[19]11|*55|023xxxxxxxx|01[1234569]x.|02[56]x.|028[013456789]x.|0282[0123467890]|0282[01236789]|05[1-9]x.|08[1-9]x.|0[34679][0-1]x.|1[03456789]x.|11[023456789]x.|12[0124789]x.|*[012346789]x.|*5[012346789]x.)

fellaintga

195 posts

Master Geek

#805430 25-Apr-2013 13:01

yumcimil: I've been having great difficulties with dialplans and Snap Plus on this linksys ATA. I've tried various ones that have been posted here, but no matter what, I can't dial anything that's not a cellphone. It receives calls okay, and can dial cellphones (at least 021 numbers) just fine. I've checked that the Fritzbox functions correctly with the phone, but the rest of its functionality isn't useful to me.

Current plan is

(021[3-9]xxxxx|0[34679][2-9]xxxxxx), which I believe should either ring VF mobiles, or NZ landlines. If I call a landline, the answering line rings for a fraction of a second, then goes silent - from the ATA end, it never rings, just goes straight to a series of beeps (disconnected, I think?)

Any assistance would be greatly appreciated.

Use the Fritz built in ATA its pretty easy to setup.