Orcon Genius and WRT54GL

Forums › 2degrees (including Slingshot, Orcon, Flip, Stuff Fibre, MyRepublic, 2talk and Vocus) › Orcon Genius and WRT54GL

Teeceezy

24 posts

Geek
+1 received by user: 2

#140700 18-Feb-2014 02:17

Hey everyone,

Recently made the switch to Orcon UFB from Slingshot ADSL, and am mostly satisfied so far. A problem I have continued to encounter so far is a lack of visibility between two computers on my LAN. I have a desktop PC hooked up via Ethernet to a WRT54GL running DD-WRT, which is connected via Ethernet (not WAN) to the Genius, and a laptop which conntects to the Genius via Wi-Fi. The WRT is set up as a Switch for the Genius, as the desktop PC has no wireless and is at the other end of the house. I can see the desktop PC when connected via Ethernet to the Genius, but when connected via Wi-Fi I am unable to see the desktop PC at all. I was hoping that I might be lucky enough to find someone here with a solution to this.

FireEngine

1223 posts

Uber Geek
+1 received by user: 221

Trusted

#989418 18-Feb-2014 07:41

So this is what you have:

PC=>WRT54GL=>WiFi=>Genius Wifi
and
Laptop=>WiFi=>Genius Wifi

?

If that is the case I think you are ending up with the machines on different subnets hence they won't see each other.

You need to put the WRT54GL into wireless bridge mode I think - if it supports it, and have it turn off its DHCP server so all ip addresses come from the Genius, hence all machines will be on the same subnet and see each other.

Regards FireEngine

Teeceezy

24 posts

Geek
+1 received by user: 2

#989509 18-Feb-2014 10:28

PC->WRT54GL->Ethernet->Genius

and

Laptop->Wi-Fi->Genius

is my setup. I've turned off the DHCP, WAN and routing on the WRT, hence why it works when plugging the Laptop into the Genius via Ethernet. It's just when the Laptop connects via Wi-Fi that it can't see the WRT or the Desktop. I have a PS3 plugged into the Genius via Ethernet and it sees the Desktop's SMB share fine as well. Both computers are manually assigned. The Genius is 192.168.1.1 and is the Gateway and DNS server for both. The WRT is at 192.168.1.2, the PC 192.168.1.3, and the laptop 192.168.1.5. All have the same subnet of 255.255.255.0.

FlameBeard

344 posts

Ultimate Geek
+1 received by user: 59

Trusted

#989530 18-Feb-2014 11:03

Can you please PM me your account number?

4th gen i7 Haswell 4770k, G.SKILL RipjawsX 16GB (4x4 Gb) DDR3 2400MHz, x1 GTS 460, Intel 180Gb 530 Series SSD, x1 Seagate 1Tb HDD, x1 Seagate 2Tb HDD, Modular 850w PSU, R.O.G. Maximus VII Formula mobo, Cooler Master Storm Trooper Chassis, Cooler Master V8 CPU cooler

"Five exclamation marks, the sure sign of an insane mind." - Terry Pratchett

No longer work for Orcon

FlameBeard

344 posts

Ultimate Geek
+1 received by user: 59

Trusted

#989605 18-Feb-2014 13:47

You're not running a firewall at all through there are you? I can't get it to respond to the remote management.

Edit: I cannot get the Genius to respond to remote management.

Teeceezy

24 posts

Geek
+1 received by user: 2

#989607 18-Feb-2014 13:49

No I've got the firewall settings low on both routers.

FlameBeard

344 posts

Ultimate Geek
+1 received by user: 59

Trusted

#989618 18-Feb-2014 13:53

ok thanks for that, if its ok with you, I might kick your session to force your connection grab another IP address to make sure that everything is running ok.

AliExpress

Shop now on AliExpress (affiliate link).

ubergeeknz

3344 posts

Uber Geek
+1 received by user: 1041

Trusted

Vocus

#989623 18-Feb-2014 13:54

Reboot. If that doesn't fix the problem, please try factory reset on the Genius.

Also please don't disable Firewall on your Genius router, or there will be trouble.

FlameBeard

344 posts

Ultimate Geek
+1 received by user: 59

Trusted

#989624 18-Feb-2014 13:56

ubergeeknz: Reboot. If that doesn't fix the problem, please try factory reset on the Genius.

Also please don't disable Firewall on your Genius router, or there will be trouble.

Cannot agree with this more

FlameBeard

344 posts

Ultimate Geek
+1 received by user: 59

Trusted

#989638 18-Feb-2014 14:03

let me know when you're able to reboot the modem as currently it is not responding. :)

FlameBeard

344 posts

Ultimate Geek
+1 received by user: 59

Trusted

#989660 18-Feb-2014 14:42

also another thing, when you reboot can you please disconnect every other device, including you WRT54GL and leave in one wired device. Currently seeing a high amount of re-auth attemps hitting RADIUS now. So we need to isolate that WRT54GL off of the network to get some solid testing done.

Teeceezy

24 posts

Geek
+1 received by user: 2

#989669 18-Feb-2014 14:57

Rebooted. Had tried factory resetting but then had no net access for last hour or so (modem said connection was up but all net pages timed out). Nothing accessing the Genius router on my side other than my laptop.

Quic Broadband

Move to New Zealand's best fibre broadband service (affiliate link). Free setup code: R587125ERQ6VE. Note that to use Quic Broadband you must be comfortable with configuring your own router.

redheart

20 posts

Geek

#990085 19-Feb-2014 07:16

try to disable automatic dhcp on your wrt54.

sbiddle

30853 posts

Uber Geek
+1 received by user: 9996

Retired Mod

Trusted

Biddle Corp

Lifetime subscriber

#990093 19-Feb-2014 07:51

It sounds like buying $15 switch would be far less hassle.

Teeceezy

24 posts

Geek
+1 received by user: 2

#992722 23-Feb-2014 12:01

Okay new wrinkle just established to this problem. It's not a WRT problem. Any computer that connects via Wi-Fi can not see anything from the Genius that is Ethernet connected to the LAN. The reset after a few hiccups had worked, but now am back to Wi-Fi and Ethernet not playing nice. Have tested with multiple computers on the Wi-Fi side and the Ethernet. Ethernet communication is fine, but no matter how many resets Wi-Fi LAN can not reach Eth LAN. Any ideas what would cause this?