[Snap] New Snap VOIP Settings

Forums › 2degrees (including Slingshot, Orcon, Flip, Stuff Fibre, MyRepublic, 2talk and Vocus) › [Snap] New Snap VOIP Settings

rurd2di

23 posts

Geek

#145321 14-May-2014 22:08

Hey Guys.
so apparently Snap have changed VOIP settings and refuse to give them to me as im running an unsupported Cisco phone.
so can anybody give me the current latest settings as I keep getting Failed No Response on registration.
been trying to use connect1.plus.snap.net.nz , but this doesn't seem right.
can anybody point me in the right direction?

Benoire

2878 posts

Uber Geek
+1 received by user: 681

#1045160 14-May-2014 22:11

connect1.plus.snap.net.nz is what is in my fritz!box...

eXDee

4033 posts

Uber Geek
+1 received by user: 1070

Trusted

#1045164 14-May-2014 22:18

Benoire: connect1.plus.snap.net.nz is what is in my fritz!box...

same here

sbiddle

30853 posts

Uber Geek
+1 received by user: 9996

Retired Mod

Trusted

Biddle Corp

Lifetime subscriber

#1045305 15-May-2014 08:40

There are potentially around 20+ common VoIP settings that will determine whether SIP devices will talk to each other. Proxy, username and password are merely 3 of them.

steve98

1400 posts

Uber Geek
+1 received by user: 252

Trusted

#1045825 15-May-2014 20:57

Does the phone connect to the internet via the Fritzbox? If so you can just program the phone with your public IP address as the sip server address and setup an internet-accessible sip username and password for it via the fritzbox UI.