![]() ![]() ![]() |
Sideface
Sideface: try:
FRITZ!Box 7390 - Recovery File
http://www.fritzbox.com.au/firmware/annex_b/FRITZ.Box_Fon_WLAN_7390.AnnexB.en-de-es-it-fr.04.86-18550.recover-image.exe
Paul1977:Sideface: try:
FRITZ!Box 7390 - Recovery File
http://www.fritzbox.com.au/firmware/annex_b/FRITZ.Box_Fon_WLAN_7390.AnnexB.en-de-es-it-fr.04.86-18550.recover-image.exe
Thanks, but isn't this for firmware 4.86?
I could use this to roll back if if I also had the firmware upgrade to 5.22, but unfortunately I don't as I must have deleted it.
#include <std_disclaimer>
Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.
hio77:
by the looks of it.
yes.
5.22 Firmware
and..
5.51 Recovery Firmware
Unfortunately, i dont have 5.22 handy. 5.51 however.
best of luck..
Paul1977: Well, I was a little scared for a bit there.
The 4.86 restore seemed to brick the Fritz after it completed. The LAN ports all went dead about 5 seconds after powering on the unit... and when I tried the 5.51 recover it said it couldn't find the Fritz.
Fortunately on the third go with the 5.51 recovery it found the Fritz and recovered 5.51 successfully. From there I could just use the 5.22 "upgrade" file to downgrade to 5.22.
Now all is well with the world.
But if anyone happens to have a 5.22 recovery file I would still love to get it so I could keep it on file.
Thanks.
#include <std_disclaimer>
Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.
![]() ![]() ![]() |