asus rt-n56u issue

Forums › 2degrees (including Slingshot, Orcon, Flip, Stuff Fibre, MyRepublic, 2talk and Vocus) › asus rt-n56u issue

YJ

145 posts

Master Geek

#164370 7-Feb-2015 14:16

My router is asus rt-n56u.

After i changed some settings in the router, it won't let me log into the router again, but sometimes it's working.

the message came up as below,

Settings have been updated. Web page will now refresh.
Changes have been made to the IP address or port number. You will now be disconnected from RT-N56U.
To access the settings of RT-N56U, reconnect to the wireless network and use the updated IP address and port number.

Anyone got any idea?

pohutukawa

197 posts

Master Geek

#1232519 7-Feb-2015 14:18

Connect to the ASUS with a network cable rather than trying to set up via wifi.

Once it is all working fine, then try connecting via wifi.

Sounds like the encryption or some other wifi setting is giving you some general connection instability which is manifesting itself as issues with logging into the modem.

stuzz

353 posts

Ultimate Geek

ID Verified

Trusted

#1232520 7-Feb-2015 14:21

I had this issue.

After googling I found the firmware needed upgrading to fix.

Pretty easy to do once you get logged in ( a restart of router will allow this) and issue has certainly been fixed afterwards.

YJ

145 posts

Master Geek

#1232522 7-Feb-2015 14:27

thanks, tried the wired connection, still no joy, will restart it later on and then update the router firmware.

pohutukawa

197 posts

Master Geek

#1232523 7-Feb-2015 14:29

YJ: thanks, tried the wired connection, still no joy, will restart it later on and then update the router firmware.

https://www.google.co.nz/#q=%22Settings+have+been+updated.+Web+page+will+now+refresh.%22+n56u

→ http://vip.asus.com/forum/view.aspx?board_id=11&model=RT-N56U&id=20140929050917433&page=1&SLanguage=en-us

stuzz

353 posts

Ultimate Geek

ID Verified

Trusted

#1232525 7-Feb-2015 14:39

The current firmware I'm running is 3.0.0.4.376_3637

Have had no login issues with this one.

YJ

145 posts

Master Geek

#1232545 7-Feb-2015 15:10

Thanks, updated the firmware, seems working fine now. Thanks you all.

Scotty1986

315 posts

Ultimate Geek

#1234648 11-Feb-2015 12:46

I had the exact same issue, I also updated the firmware and no issues so far.

Equinox IT

Cloud spending continues to surge globally, but most organisations haven’t made the changes necessary to maximise the value and cost-efficiency benefits of their cloud investments. Download the whitepaper From Overspend to Advantage now.

xlinknz

1127 posts

Uber Geek

Trusted

#1243675 21-Feb-2015 14:07

I think I have this issue too

when peps upgraded the firmware did it keep the settings or should I record those esp. the NAT settings MyRepublic use

stuzz

353 posts

Ultimate Geek

ID Verified

Trusted

#1243677 21-Feb-2015 14:09

xlinknz: I think I have this issue too

when peps upgraded the firmware did it keep the settings or should I record those esp. the NAT settings MyRepublic use

I had to set mine up again. Would pay to record settings.