Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


Forums › 2degrees (including Slingshot, Orcon, Flip, Stuff Fibre, MyRepublic, 2talk and Vocus) › How to configure Cyberoam to Orcon UFB
winesearcher

1 post

Wannabe Geek


#177065 20-Jul-2015 21:18
Send private message

Hi Everyone,

I have problem to configure Cyberoam firewall as a gateway to Orcon UFB. Orcon's modem requires automatic IP obtaining, but Cyberoam need spcified IPs. Is there any way to get IPs from Orcon?

Thanks,

Lingbai

Create new topic
ubergeeknz
3344 posts

Uber Geek
+1 received by user: 1041

Trusted
Vocus

  #1348050 20-Jul-2015 21:24
Send private message

How are you wanting to set this up?

You can of course disable DHCP on the router, and specify an IP address on the Firewall.  But that will leave you with the Orcon router doing NAT which is probably not the best way.

Can you not configure the WAN interface to perform DHCP on tagged VLAN 10?  Then you can attach it direct to the ONT and NAT the LAN interface.

Create new topic








Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.


Updates »

Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.








RSS feeds
Main feed
Forums feed
Copyright
©2002-2026 Geekzone®
Site features
Geekzone BI dashboard
Geekzone Badges
Geekzone Status Page

 

Site Information
Subscribe to Geekzone
Privacy Statement
Forum Usage Guidelines (FUG)
Advertising
Trademark and copyright