is the slingshot UFB router still "crap"?

Forums › 2degrees (including Slingshot, Orcon, Flip, Stuff Fibre, MyRepublic, 2talk and Vocus) › is the slingshot UFB router still "crap"?

floydie

474 posts

Ultimate Geek

#183929 3-Nov-2015 19:37

looking at upgrading to UFB...weve been with SS for over 5 years but have heard reports that the UFB router supplied is woeful...is that still the case? i need decent wifi and the ability to set the dns for getflix and have Gigabit lan ports

Jase2985

13459 posts

Uber Geek

ID Verified

Lifetime subscriber

#1420178 3-Nov-2015 20:54

http://www.geekzone.co.nz/forums.asp?forumid=81&topicid=159872

if you consider yourself an advanced user buy your own, many threads on what modem to buy to have a look at

Detruire

1771 posts

Uber Geek

#1420291 3-Nov-2015 23:01

This post suggests that they may have (finally) stopped supplying the Tripleplay, although the NF4V may be an "at additional charge" option.

rm *

dukester

475 posts

Ultimate Geek

ID Verified

Lifetime subscriber

#1420307 4-Nov-2015 04:40

floydie: looking at upgrading to UFB...weve been with SS for over 5 years but have heard reports that the UFB router supplied is woeful...is that still the case? i need decent wifi and the ability to set the dns for getflix and have Gigabit lan ports

The wireless side of the Tripleplay is very poor. I disabled it and added a TPLink wireless access point. Its way better than the Tripleplay.

numfarr

329 posts

Ultimate Geek

#1420386 4-Nov-2015 08:37

They sent me an NF4V, it's OK but I ended up using a TP-Link WR1043ND with Gargoyle instead (not using the phone service so the VOIP didn't matter).

shk292

2853 posts

Uber Geek

Lifetime subscriber

#1427142 12-Nov-2015 19:58

It's interesting that they are now supplying the Nf4V - having suffered from various problems with the Triple Play, I bought an NF4V today and got it working - except for voice. I'm 99% sure that I copied all the settings correctly, and even a call to SS helpdesk, where they then remoted in and checked everything, didn't help - the voice line just shows as "down"

Has anyone got voice working on an NF4V on slingshot UFB? Were there any obscure settings that needed to be made? I've copied the SIP password from the saved config file, and SS conformed this was OK.

PS - I know there are several threads about this router, and I have read them all

shk292

2853 posts

Uber Geek

Lifetime subscriber

#1437858 30-Nov-2015 14:02

Just bumping this thread...

I've had no luck getting the VOIP to work on the NF4V. Slingshot tech support were as much use as a chocolate fireguard, hadn't heard of the NF4V which is really odd since they are now supplying it. I extracted the VOIP password from my Tripleplay config backup, but the VOIP never registers. Interestingly, if I use the same config details in a softphone on a PC, it connects to VOIP and I can make calls

So, does anyone here have a NF4V running on Slingshot UFB and supporting VOIP? If so, would you be willing to share your config file (with passwords redacted)? It would be great to get this device working

Krishant007

1403 posts

Uber Geek

#1437889 30-Nov-2015 14:44

Hm, would like to keep an eye on this thread. I have just signed up for UFB and they sent me the Triple play (although i told them that I dont need the UFB router). I was hoping to use my existing DLink for the UFB (it was stated as UFB ready and I think it is definitely better than what we get from the telcos)

AliExpress

Shop now on AliExpress (affiliate link).

Brumfondl

1187 posts

Uber Geek

Trusted

#1437904 30-Nov-2015 15:24

shk292: Just bumping this thread...

I've had no luck getting the VOIP to work on the NF4V. Slingshot tech support were as much use as a chocolate fireguard, hadn't heard of the NF4V which is really odd since they are now supplying it. I extracted the VOIP password from my Tripleplay config backup, but the VOIP never registers. Interestingly, if I use the same config details in a softphone on a PC, it connects to VOIP and I can make calls

So, does anyone here have a NF4V running on Slingshot UFB and supporting VOIP? If so, would you be willing to share your config file (with passwords redacted)? It would be great to get this device working

If you still have the Tripleplay and it was working fine then you need to extract ALL of the voice settings from it, both Basic and Advanced. I had the TP and replaced it with an NF4V and it worked fine and dandy when I took the settings from one to the other.

I am no longer with Slingshot but worse comes to worst I can try and hook the tripleplay back up to a machine and see if I can grab the settings for you.

shk292

2853 posts

Uber Geek

Lifetime subscriber

#1437907 30-Nov-2015 15:30

Brumfondl:
shk292: Just bumping this thread...

I've had no luck getting the VOIP to work on the NF4V. Slingshot tech support were as much use as a chocolate fireguard, hadn't heard of the NF4V which is really odd since they are now supplying it. I extracted the VOIP password from my Tripleplay config backup, but the VOIP never registers. Interestingly, if I use the same config details in a softphone on a PC, it connects to VOIP and I can make calls

So, does anyone here have a NF4V running on Slingshot UFB and supporting VOIP? If so, would you be willing to share your config file (with passwords redacted)? It would be great to get this device working

If you still have the Tripleplay and it was working fine then you need to extract ALL of the voice settings from it, both Basic and Advanced. I had the TP and replaced it with an NF4V and it worked fine and dandy when I took the settings from one to the other.

I am no longer with Slingshot but worse comes to worst I can try and hook the tripleplay back up to a machine and see if I can grab the settings for you.

Thank you, but I still have the TP and I think I have transferred all the settings - it is not a direct one to one mapping but I've done my best. I'd also previously tried to configure a HG659 in the same way, with the same results.

The only other thing I thought of was whether I need to look at the firewall rules and make sure the same ports are open