I would like to use the billion 7800n than fritzbox (internal testing reasons).

I am connecting the HG8240H to the ewan port on 7800n, then using the following settings on the Billion

Main port Ewan

Protocol PPPoE

Auth protocol Auto

Username (username)@snap.net.nz

password (password)

MTU 1492

Vlan Mux 10

But seems like that is not working, I am receiving  the following error in the log. Is there anything I am missing?

The username and password is same which logs into https://secure.2degreesbroadband.co.nz/login/?next=/ (username with out the @snap.net.nz)

 

Jan 01 00:02:32 daemon pppd[1915]: PPP: Start to connect ...
Jan 01 00:02:37 daemon pppd[1915]: PPP server detected.
Jan 01 00:02:37 daemon pppd[1915]: PPP session established.
Jan 01 00:02:37 daemon pppd[1915]: Using interface pppewan_1
Jan 01 00:02:37 daemon pppd[1915]: Connect: ppp_ewan_1 <--> eth0.10
Jan 01 00:02:37 daemon pppd[1915]: PPP LCP UP.
Jan 01 00:02:38 daemon pppd[1915]: Remote message: Sorry, Bad Credentials
Jan 01 00:02:38 daemon pppd[1915]: PAP authentication failed
Jan 01 00:02:39 daemon pppd[1915]: User name and password authentication failed.