iTalk Trixbox Trunk Settings

Forums › 2degrees (including Slingshot, Orcon, Flip, Stuff Fibre, MyRepublic, 2talk and Vocus) › iTalk Trixbox Trunk Settings

ajobbins

5053 posts

Uber Geek
+1 received by user: 1279

Trusted

#21965 12-May-2008 12:35

I've used Trixbox in the past with my iTalk line with no issues, however after installing TB2.6 today I cannot get the thing working again.

I am using the exact same details as before (See below), and it looks like the trunk is registering, however no calls in or out.

If I try and dial out I get the "All circuits are busy now" congestion mesasge. If I try and dial in, I get the iTalk VM system.

If anyone can point me in the right direction I would be very grateful.

Outgoing Settings:

Trunk Name: iTalk Napier

PEER Details:

allow=alaw,ulaw
canreinvite=no
disallow=all
dtmfmode=rfc2833
fromuser=646843XXXX
host=npe.italk.co.nz
insecure=very
nat=yes
secret=<MY PW HERE>
type=friend
contact=friend
username=646843XXXX

Register String: 646843XXXX:<MY PW HERE>@npe.italk.co.nz/646843XXXX

ajobbins

5053 posts

Uber Geek
+1 received by user: 1279

Trusted

#130557 13-May-2008 13:28

OK so I have outbound calling going with the following in PEER details, however when I try and call in I just get a busy tone:

type=friend
username=646843XXXX
fromuser=646843XXXX
secret=<PW HERE>
host=npe.italk.co.nz
context=default
dtmfmode=rfc2833
disallow=all
allow=alaw&ulaw
nat=yes
canreinvite=no
insecure=invite,port

ajobbins

5053 posts

Uber Geek
+1 received by user: 1279

Trusted

#130859 14-May-2008 13:40

Taking a look at the log files, when I get an incomming call it shows the following:

[May 14 13:34:14] NOTICE[2722] chan_sip.c: Call from '646843XXXX' to extension '646843XXXX' rejected because extension not found.

I thought this may be a NAT issue but it appears that the call is getting to the box OK, but then the box is rejecting it.

I have a ANY inbound route setup, which works fine if I call 7777 from an extension, so I am unsure why this is happening. I have tried googling but came up with nothing.

If anyone can shed some light on this I would be very grateful.

sbiddle

30853 posts

Uber Geek
+1 received by user: 9996

Retired Mod

Trusted

Biddle Corp

Lifetime subscriber

#130865 14-May-2008 13:59

Have you tried creating an inbound route with your 646xxxxxxx number and then setting this to an extension, IVR menu or ring group?

ajobbins

5053 posts

Uber Geek
+1 received by user: 1279

Trusted

#130869 14-May-2008 14:01

Yes, same result unfortuantely.

ajobbins

5053 posts

Uber Geek
+1 received by user: 1279

Trusted

#130889 14-May-2008 15:12

I tried it as the number on incoming route, no luck

Then i tried setting it as the DID number for one of the extensions, no luck

Then I made an extension that matched the number, 646843XXXX. and the call came in!

I tried to do the same, but with a ring group rather than an extension, no luck.

I dont want to have to have an extension of the number just to recieve the incoming call. Anyone know why this may be happening?