IP Address of 2Degrees STUN Server

Forums › 2degrees (including Slingshot, Orcon, Flip, Stuff Fibre, MyRepublic, 2talk and Vocus) › IP Address of 2Degrees STUN Server

eapperley

3 posts

Wannabe Geek

#237989 27-Jun-2018 22:58

Can someone advise the address of the 2Degrees STUN Server please? ''

I need to use that address for the setup of the FritzBox (using it with another router).

Thanks.

michaelmurfy

meow
13215 posts

Uber Geek

Moderator

ID Verified

Trusted

Lifetime subscriber

#2045106 27-Jun-2018 23:29

Shouldn't need a STUN server.

2degrees has the information you need Here.

Michael Murphy | https://murfy.nz
Referral Links: Quic Broadband (use R122101E7CV7Q for free setup)

Are you happy with what you get from Geekzone? Please consider supporting us by subscribing.
Opinions are my own and not the views of my employer.

Mighty Ape

Shop now on Mighty Ape (affiliate link).

eapperley

3 posts

Wannabe Geek

#2045110 27-Jun-2018 23:56

Thanks.

I will be using the FritzBox purely as an ATA behind a non-LAN interface of a pfSense Router. The reason for asking was actually this web page:

https://en.avm.de/service/fritzbox/fritzbox-7490/knowledge-base/publication/show/177_Conducting-calls-with-the-FRITZ-Box-over-another-router/

plus in creating firewall rules for SIP and RTP traffic I'd like to restrict the traffic source to be the 2Degrees VoIP server only.

I notice that the current FritzBox settings for the Proxy and Domain are "connect2.plus.snap.net.nz" and not "connect1.plus.snap.net.nz" as in your referenced article. Does that mean that "connect2.plus.snap.net.nz." address is correct and that the article needs updating?

vulcannz

436 posts

Ultimate Geek
Inactive user

#2045146 28-Jun-2018 08:19

You should not need inbound rules. The Fritz box registers as a client.

NickMack

948 posts

Ultimate Geek

Trusted

Lifetime subscriber

#2045627 28-Jun-2018 16:12

eapperley:

Thanks.

I will be using the FritzBox purely as an ATA behind a non-LAN interface of a pfSense Router. The reason for asking was actually this web page:

https://en.avm.de/service/fritzbox/fritzbox-7490/knowledge-base/publication/show/177_Conducting-calls-with-the-FRITZ-Box-over-another-router/

plus in creating firewall rules for SIP and RTP traffic I'd like to restrict the traffic source to be the 2Degrees VoIP server only.

I notice that the current FritzBox settings for the Proxy and Domain are "connect2.plus.snap.net.nz" and not "connect1.plus.snap.net.nz" as in your referenced article. Does that mean that "connect2.plus.snap.net.nz." address is correct and that the article needs updating?

Connect1 and connect2 are primary and secondary.. no difference :-)

Nick

https://nick.mackechnie.co.nz | NZ ISP latency monitoring - https://smokeping.thenet.gen.nz

speed

293 posts

Ultimate Geek

#2045635 28-Jun-2018 16:21

NickMack:

Connect1 and connect2 are primary and secondary.. no difference :-)

They also resolve to exactly the same IP address, despite the CNAMEs indicating that one is in Wellington and the other in ChCh (can't be both, unless it's anycast?!).

$ dig connect1.plus.snap.net.nz +short
chcacme01.plus.snap.net.nz.
123.255.8.34

$ dig connect2.plus.snap.net.nz +short
wlgacme01.plus.snap.net.nz.
123.255.8.34