slow down speed on Gigabit connection

Forums › 2degrees (including Slingshot, Orcon, Flip, Stuff Fibre, MyRepublic, 2talk and Vocus) › slow down speed on Gigabit connection

Stasis007

85 posts

Master Geek
+1 received by user: 3

#241020 7-Oct-2018 13:27

Hey guys, figured I'd tap into the knowledge pool here before trying 2 Degrees help-desk.

I just got a new 2 Degrees Gigabit connection activated yesterday, but I'm only getting 93Mbps down, 530Mbps up via the 2degrees ChCh server on Speedtest. Similar results on a bunch of other servers I tried.

Getting identical results on the Speedtest app via 5G on my S7 (93/525 on last test)

Fritzbox 7490 shows my current active connections as:

LAN 2 at 1 Gbit/s <-- PC Ethernet connection

WirelessLAN 5 GHz, 780 / 866 Mbit/s <-- Galaxy S7

My PC and phone are the only devices connected.

Power Mode is 1 Gbit/s on all LAN ports.

Enable ONT connected LAN 1 to Fritz LAN 1. Lights green (correct for Enable).

Anyone had the same issue? Only similar result I can find points to a NIC driver issue but I'm getting exactly the same speeds on the 5G connection to my phone.

hio77

'That VDSL Cat'
13036 posts

Uber Geek
+1 received by user: 3896

ID Verified

Trusted

Lizard Networks

Subscriber

#2102890 7-Oct-2018 13:33

Have seen this issue pop up a few times with 2d.

First thing i'd check is the rate limiting on the fritzbox is set correctly.

Following that 2d would need to have another look on their end.

@nickmack is normally quite onto it with these ones

#include <std_disclaimer>

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.

NickMack

977 posts

Ultimate Geek
+1 received by user: 831

Trusted

In memoriam

Lifetime subscriber

#2102893 7-Oct-2018 13:39

Hiya

Have you read all of the following thread? https://www.geekzone.co.nz/forums.asp?forumid=85&topicid=239862

You may want to call care on 0800 022022 to ensure profile is correct.

Nick

Ps - Bathurst #Holden

https://nick.mackechnie.co.nz | NZ ISP latency monitoring - https://smokeping.thenet.gen.nz

Stasis007

85 posts

Master Geek
+1 received by user: 3

#2102901 7-Oct-2018 14:10

hio77:

First thing i'd check is the rate limiting on the fritzbox is set correctly.

Thanks for replies. Yeah no rate limiting currently set on the Fritz.

NickMack:
Have you read all of the following thread? https://www.geekzone.co.nz/forums.asp?forumid=85&topicid=239862

My Fritz's internet connection setting is "Via the FRITZ!BOX" which greys out the Data Throughput manual speed. I changed it to "Via an external modem" and entered 999999 kbit/s for both which gives exactly the same speeds. Have changed it back to "Via Fritzbox".

The user name on the Fritz's internet connection is: snap-factory Is that normal?

Getting ready to gird my loins and try phone support... doesn't sound like a problem that a script will help so extra painful!

Aredwood

3885 posts

Uber Geek
+1 received by user: 1749

#2102903 7-Oct-2018 14:24

It could well be a profile issue. I had a similar issue previously. Helpdesk was able to fix it on the spot and no issues since.

I'm assuming that the Fritzbox is one that 2degrees directly provided to you? As the Fritzbox serial numbers are associated with accounts. So if you had bought your fritzbox from Trademe, friend etc. You will get rate limited to the speed of their connection.

If the above is the case, the helpdesk can also easily change the Fritzbox to your account.

afe66

3181 posts

Uber Geek
+1 received by user: 1678

Lifetime subscriber

#2102904 7-Oct-2018 14:26

Have you tried several speed test servers?

Replaced ethernet cable ? (My PC speed had dropped to 5mbs down and 250 up, swapped cable and all right now - cable had got crushed without me noticing. Vodafone)

NickMack

977 posts

Ultimate Geek
+1 received by user: 831

Trusted

In memoriam

Lifetime subscriber

#2102906 7-Oct-2018 14:27

Stasis007:
hio77:

First thing i'd check is the rate limiting on the fritzbox is set correctly.

Thanks for replies. Yeah no rate limiting currently set on the Fritz.

NickMack:
Have you read all of the following thread? https://www.geekzone.co.nz/forums.asp?forumid=85&topicid=239862

My Fritz's internet connection setting is "Via the FRITZ!BOX" which greys out the Data Throughput manual speed. I changed it to "Via an external modem" and entered 999999 kbit/s for both which gives exactly the same speeds. Have changed it back to "Via Fritzbox".

The user name on the Fritz's internet connection is: snap-factory Is that normal?

Getting ready to gird my loins and try phone support... doesn't sound like a problem that a script will help so extra painful!

Username is wrong, its limited in speed - Call care for help.

https://nick.mackechnie.co.nz | NZ ISP latency monitoring - https://smokeping.thenet.gen.nz

Geekzone support

Support Geekzone with one-off or recurring donations Donate via PressPatron.

Stasis007

85 posts

Master Geek
+1 received by user: 3

#2102915 7-Oct-2018 15:36

NickMack:
Username is wrong, its limited in speed - Call care for help.

Yeah looks like they had an incorrect profile mapped to the Fritz. All fixed now. Thanks! :)

Stasis007

85 posts

Master Geek
+1 received by user: 3

#2102935 7-Oct-2018 17:01

Should add that tech support was completely painless. Thanks 2Degrees as well!

NickMack

977 posts

Ultimate Geek
+1 received by user: 831

Trusted

In memoriam

Lifetime subscriber

#2102936 7-Oct-2018 17:02

Stasis007:
Should add that tech support was completely painless. Thanks 2Degrees as well!

Great stuff... back to Bathurst :-)

https://nick.mackechnie.co.nz | NZ ISP latency monitoring - https://smokeping.thenet.gen.nz

dfnt

1553 posts

Uber Geek
+1 received by user: 1036

Trusted

Lifetime subscriber

#2102941 7-Oct-2018 17:52

NickMack:
Stasis007:

Should add that tech support was completely painless. Thanks 2Degrees as well!

Great stuff... back to Bathurst :-)

Because you don't want to see Otago losing to Tasman? :p

NickMack

977 posts

Ultimate Geek
+1 received by user: 831

Trusted

In memoriam

Lifetime subscriber

#2103057 7-Oct-2018 22:34

dfnt:
NickMack:
Stasis007:

Should add that tech support was completely painless. Thanks 2Degrees as well!

Great stuff... back to Bathurst :-)

Because you don't want to see Otago losing to Tasman? :p

Indeed.. I feel you have the upper hand, as I have no idea who I'm talking with... oh well ;-)

Nick

https://nick.mackechnie.co.nz | NZ ISP latency monitoring - https://smokeping.thenet.gen.nz