Well, I got my VLAN tagging sorted and now I'm on to trying to get my old phone number that was ported from copper to HomePhonePlus working and after a solid 4 hours, I'm getting no joy.
Anyone here recently get an SPA112 working with 2Degrees?
I'm running into a couple of possible issues:
- I tried resetting my VOIP password via their web interface and the directions there are very poor. I *think* you have to enter your broadband password into the current password field and then input their autogenerated password to apply the changes. I did this and it confirmed the password was changed, but I get password registration errors when even testing on a softphone like Linphone (which works just fine for my SIP account I use for a USA based VOIP account). Furthermore, when I talked to 2Degrees and asked them if they could send me SIP password, it was not at all the one I changed it to. Additionally they could see that I changed the password, but their system was showing the original password they have.
The question here is - has anyone been able to successfully update their SIP password via the 2Degrees HomePhonePlus portal and still have the SIP device working/connecting?
- Any current/updated configuration settings or tips *specifically* for 2Degrees and a SIP device like the SPA112? I've been given conflicting information about using connect2.plus.snap.net.nz versus connect1.plus.snap.net.nz
- Recommended softphone for windows for testing HomePhonePlus from behind a NAT'ed router? Like I said, I can get through using Linphone with an SIP service from another company in my current configuration with no problem. Just can't get Home Phone Plus to work at all