2degrees and the Linux Universe

Forums › 2degrees (including Slingshot, Orcon, Flip, Stuff Fibre, MyRepublic, 2talk and Vocus) › 2degrees and the Linux Universe

TheoM

229 posts

Master Geek
+1 received by user: 55

ID Verified

Trusted

#243091 26-Nov-2018 16:06

Hey all you Geekzoners!

I'm sure @NickMack and @michaelmurfy will likely chime in on this in a while, but while I've got some free time I thought I'd casually drop by and mention that 2degrees is now mirroring my Linux mirrors! If you're using openSuSE or Arch Linux you should immediately see the change occur.

If you rsync from myself for your mirrors, for now you'll be pushed to them whilst I find a new AM3+ board to replace the failing one. We'll be working closely together over the next few weeks and months to add more mirrors, so of course if you want anything mirrored, it doesn't hurt to ask.

For those of you who would like to see what we're mirroring, and (if) you have rsync, all you have to do is run this:

rsync -v rsync://rsync.mirrors.theom.nz

A big thank you goes to Nick for helping getting this organised. I couldn't have done this without you!

Hi! I'm TheoM, but you know that already. I run Linux mirrors in NZ together with 2degrees. Like a mirror added? PM me!

https://theom.co.nz | https://theom.nz | https://mirrorlist.mirrors.theom.nz | Providing Free Mirrors Since Ages Ago™

dfnt

1553 posts

Uber Geek
+1 received by user: 1036

Trusted

Lifetime subscriber

#2134677 26-Nov-2018 16:11

Nice, I was using your arch linux mirror till it went offline at some point with NXDOMAIN so switched to mirroring internode and setting up my own mirror for no other reason than I was bored

Also, cert needs sorting out

Edit: I'd also have expected to get 100+ MB/s down on a 2degs 1gbit fibre from the mirror. Is it rate limited?

2018-11-26 16:15:27 (55.3 MB/s) - ‘archlinux-2018.11.01-x86_64.iso’ saved [614465536/614465536]

TheoM

229 posts

Master Geek
+1 received by user: 55

ID Verified

Trusted

#2134683 26-Nov-2018 16:19

dfnt:

Nice, I was using your arch linux mirror till it went offline at some point with NXDOMAIN so switched to mirroring internode and setting up my own mirror for no other reason than I was bored

Also, cert needs sorting out

Yeah, I've had quite a few issues with the old hardware starting to kick the bucket. hopefully getting that fixed sometime this week. I'll also get that cert issue fixed up. Internally we use mirrorbits to send you to the closest mirror, but unfortunately with my file server going offline every now and then, it doesn't make it easy. In any case for now you should have quite a reliable connection to 2degrees, so if you wanted you could always switch back

Once I have some new hardware you should see quite the stability improvement. Sorry about the outages. It shouldn't have taken me this long to fix, but then I don't quite have an unlimited budget... yet

Hi! I'm TheoM, but you know that already. I run Linux mirrors in NZ together with 2degrees. Like a mirror added? PM me!

https://theom.co.nz | https://theom.nz | https://mirrorlist.mirrors.theom.nz | Providing Free Mirrors Since Ages Ago™

michaelmurfy

meow
13579 posts

Uber Geek
+1 received by user: 10910

Moderator

ID Verified

Trusted

Lifetime subscriber

#2134703 26-Nov-2018 16:35

Good job guys! Good to see this has happened.

Theo - is Manjaro mirrored also?

Michael Murphy | https://murfy.nz
Referral Links: Quic Broadband (use R122101E7CV7Q for free setup)

Are you happy with what you get from Geekzone? Please consider supporting us by subscribing.
Opinions are my own and not the views of my employer.

TheoM

229 posts

Master Geek
+1 received by user: 55

ID Verified

Trusted

#2134707 26-Nov-2018 16:41

michaelmurfy: Good job guys! Good to see this has happened.

Theo - is Manjaro mirrored also?

It will be soon. Work has literally just given me an old AM3+ machine, so I'll have the mirrors sorted in the next 45 minutes or so, then I'll pull down Manjaro. Told you it didn't hurt to ask

Hi! I'm TheoM, but you know that already. I run Linux mirrors in NZ together with 2degrees. Like a mirror added? PM me!

https://theom.co.nz | https://theom.nz | https://mirrorlist.mirrors.theom.nz | Providing Free Mirrors Since Ages Ago™

KiwiSurfer

1722 posts

Uber Geek
+1 received by user: 993

ID Verified

Lifetime subscriber

#2134726 26-Nov-2018 17:04

Would mirroring Debian be possible? I'm with Slingshot though so not sure if worthwhile me using this mirror vs the exisiting NZ mirrors for Debian.

TheoM

229 posts

Master Geek
+1 received by user: 55

ID Verified

Trusted

#2134728 26-Nov-2018 17:08

KiwiSurfer:
Would mirroring Debian be possible? I'm with Slingshot though so not sure if worthwhile me using this mirror vs the exisiting NZ mirrors for Debian.

Sure would. Give me about an hour and I'll start the sync. It won't be available on the 2DM mirrors until tomorrow but should be quite a bit faster than CityLink 🙂

Hi! I'm TheoM, but you know that already. I run Linux mirrors in NZ together with 2degrees. Like a mirror added? PM me!

https://theom.co.nz | https://theom.nz | https://mirrorlist.mirrors.theom.nz | Providing Free Mirrors Since Ages Ago™

New World

Shop on-line at New World now for your groceries (affiliate link).

TheoM

229 posts

Master Geek
+1 received by user: 55

ID Verified

Trusted

#2134849 26-Nov-2018 18:33

I do apologise, but I'm having just a little bit of an issue booting with the new board. Shouldn't be too much longer -- The new board doesn't support EFI booting so a few things need to be worked around

Hi! I'm TheoM, but you know that already. I run Linux mirrors in NZ together with 2degrees. Like a mirror added? PM me!

https://theom.co.nz | https://theom.nz | https://mirrorlist.mirrors.theom.nz | Providing Free Mirrors Since Ages Ago™

Tracer

343 posts

Ultimate Geek
+1 received by user: 151

#2134908 26-Nov-2018 21:30

This is great news. I've struggled with slow Arch mirrors! Any chance of Arch Linux ARM?

TheoM

229 posts

Master Geek
+1 received by user: 55

ID Verified

Trusted

#2134922 26-Nov-2018 21:52

Tracer:
This is great news. I've struggled with slow Arch mirrors! Any chance of Arch Linux ARM?

Done and done 🙂

Hi! I'm TheoM, but you know that already. I run Linux mirrors in NZ together with 2degrees. Like a mirror added? PM me!

https://theom.co.nz | https://theom.nz | https://mirrorlist.mirrors.theom.nz | Providing Free Mirrors Since Ages Ago™

Tracer

343 posts

Ultimate Geek
+1 received by user: 151

#2135494 27-Nov-2018 20:51

That cert issue seems to be causing sync issues https://www.archlinux.org/mirrors/theom.nz/1191/

-e- link

TheoM

229 posts

Master Geek
+1 received by user: 55

ID Verified

Trusted

#2135498 27-Nov-2018 21:02

Tracer:

That cert issue seems to be causing sync issues https://www.archlinux.org/mirrors/theom.nz/1191/

-e- link

That it will for a little while. Last night the LVM media failed so I'm now populating the master mirror from the 2degrees one. Currently at about 50% or 499180 files synced so far. Most of the rest is just openSuSE now, so I'll start bringing up the mirrors again shortly

Hi! I'm TheoM, but you know that already. I run Linux mirrors in NZ together with 2degrees. Like a mirror added? PM me!

https://theom.co.nz | https://theom.nz | https://mirrorlist.mirrors.theom.nz | Providing Free Mirrors Since Ages Ago™

Lego

Shop now for Lego sets and other gifts (affiliate link).

kyhwana2

2572 posts

Uber Geek
+1 received by user: 233

#2135503 27-Nov-2018 21:25

There's also https://mirror.fsmg.org.nz which is hosted in Hamilton and Auckland and peered at the various IX's in those locations :)

TheoM

229 posts

Master Geek
+1 received by user: 55

ID Verified

Trusted

#2137067 30-Nov-2018 10:04

Hey guys,

Just a little update. You should now be able to see the mirror director running now. It won't be the fastest, but the good news is it's now back online. I'm starting a sync for the existing mirrors in just a moment, then I'll start importing the new mirrors.

If anyone is able, please do show me which mirror the mirror director chooses. Use any file in the repos, for example: https://arch.mirrors.theom.nz/lastsync?mirrorlist

As an aside, if you would like to become a part of the mirror network, or work for an ISP (and also have resources available), please do get in touch -- my email can be found when you rsync from me, i.e. rsync -v rsync://rsync.mirrors.theom.nz, or simply PM me here.

As always, if you want a mirror added, either comment on a mirror thread like this one, or PM me and I'll import the mirror (as long as there's sufficient disk space. That means no fedora yet!)

Hi! I'm TheoM, but you know that already. I run Linux mirrors in NZ together with 2degrees. Like a mirror added? PM me!

https://theom.co.nz | https://theom.nz | https://mirrorlist.mirrors.theom.nz | Providing Free Mirrors Since Ages Ago™