Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


Taubin

592 posts

Ultimate Geek
+1 received by user: 243

ID Verified
Subscriber

#295255 16-Mar-2022 17:02
Send private message

My VPN to my home server has suddenly stopped working. I've rechecked all of my connections and my router, and everything is forwarded properly. I am using wireguard on unraid, and it's worked great until very recently (it worked 2 weeks ago, I haven't had a need for it since then).

 

I recreated the keypairs, and tried from a couple of different networks on both my laptop and my phone, and neither will connect. I used a port checking tool at yougetsignal, and it's showing the port as closed even though it's forwarded on my router. All of my other open ports (80, 443, etc) are working just fine.

 

With no other changes on my network, this brings me to the possibility that it's suddenly being blocked on 2degrees side so I thought I would ask here.

 

Photos of the configuration are below, ip addresses have been removed for what should be obvious reasons. 192.168.10.0/24 is outside of my network configuration, I have also tried 172.22.0.0/24 as well which is outside both with the same results.

 

 

 

 

 

 

It's probably just something stupid I'm doing, but I can't see what it might be. Any help would be great, thank you.





ZL2TOY/ZL1DMP


Filter this topic showing only the reply marked as answer Create new topic
RunningMan
9184 posts

Uber Geek
+1 received by user: 4834


  #2887297 16-Mar-2022 17:07
Send private message

Just to clarify the obvious, because it doesn't seem to be covered in the OP - do you have a public IP address with 2D? By default you get a CG-NAT address.




xpd

xpd
Geek of Coastguard
14116 posts

Uber Geek
+1 received by user: 4574

Retired Mod
ID Verified
Trusted
Lifetime subscriber

  #2887300 16-Mar-2022 17:11
Send private message

Also check with https://www.canyouseeme.org/

 

 





XPD / Gavin

 

LinkTree

 

 

 


Taubin

592 posts

Ultimate Geek
+1 received by user: 243

ID Verified
Subscriber

  #2887301 16-Mar-2022 17:17
Send private message

RunningMan:

 

Just to clarify the obvious, because it doesn't seem to be covered in the OP - do you have a public IP address with 2D? By default you get a CG-NAT address.

 

 

 

 

I do, yes. The other ports going to this server are working properly from outside of the network as well. It's just a bit strange. I've also verified it's outside of their CG-NAT allocation.





ZL2TOY/ZL1DMP




Taubin

592 posts

Ultimate Geek
+1 received by user: 243

ID Verified
Subscriber

  #2887302 16-Mar-2022 17:18
Send private message

xpd:

 

Also check with https://www.canyouseeme.org/

 

 

 

 

 

 

It's showing as closed there as well.





ZL2TOY/ZL1DMP


richms
29098 posts

Uber Geek
+1 received by user: 10209

Trusted
Lifetime subscriber

  #2887304 16-Mar-2022 17:21
Send private message

Those tests do TCP generally, you have fowarded UDP. I wouldnt expect one of them to know open from not open





Richard rich.ms

Taubin

592 posts

Ultimate Geek
+1 received by user: 243

ID Verified
Subscriber

  #2887305 16-Mar-2022 17:25
Send private message

richms:

 

Those tests do TCP generally, you have fowarded UDP. I wouldnt expect one of them to know open from not open

 

 

That makes sense. I'll keep troubleshooting and make sure nothing updated on my end, it's just a bit strange.





ZL2TOY/ZL1DMP


 
 
 

Shop on-line at New World now for your groceries (affiliate link).
nzkc
1634 posts

Uber Geek
+1 received by user: 1041


  #2887311 16-Mar-2022 17:29
Send private message

Im running Wireguard and using 2degrees. Also using that port. All fine here. Checked over my phone (wifi turned off). Able to access my home "things" just fine.


Taubin

592 posts

Ultimate Geek
+1 received by user: 243

ID Verified
Subscriber

  #2887314 16-Mar-2022 17:35
Send private message

nzkc:

 

Im running Wireguard and using 2degrees. Also using that port. All fine here. Checked over my phone (wifi turned off). Able to access my home "things" just fine.

 

 


Thank you that means it must be on my end. I'll check to see if something changed on my server since the last time I had to connect. Cheers





ZL2TOY/ZL1DMP


SaltyNZ
8862 posts

Uber Geek
+1 received by user: 9539

Trusted
2degrees
Lifetime subscriber

  #2887317 16-Mar-2022 17:45
Send private message

We don't normally deliberately block any traffic. Some types of traffic might be shaped during congestion, and conversely we also don't necessarily guarantee that other types of traffic would be prioritised either, but we don't block anything as a general rule. 





iPad Pro 11" + iPhone 15 Pro Max + 2degrees 4tw!

 

These comments are my own and do not represent the opinions of 2degrees.


Taubin

592 posts

Ultimate Geek
+1 received by user: 243

ID Verified
Subscriber

  #2887318 16-Mar-2022 17:46
Send private message

Thank you Salty, I'll toss pivpn on my pi4 and see if that's working as a test.

 

 

 

Edit: pivpn is working fine with wireguard, so it seems to be on my unraid instance. Sorry for the troubles, I'll work with unraid to see what's changed.

 

 

 

Cheers





ZL2TOY/ZL1DMP


Taubin

592 posts

Ultimate Geek
+1 received by user: 243

ID Verified
Subscriber

  #2887470 17-Mar-2022 08:10
Send private message

I just wanted to update this with my stupidity. There was a change in my server, as Unraid had updated to the latest beta. During the update (or possibly prior) there was a change in the routing for their wireguard configuration. I had to add a static route for the wireguard network to my router in order to route from the router to that network for it to route properly. Sorry about the confusion. It was totally on my network.





ZL2TOY/ZL1DMP


Filter this topic showing only the reply marked as answer Create new topic








Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.