Please support Geekzone by subscribing, or using one of our referral links: Mighty Ape | Samsung | AliExpress | Wise | Sharesies | Hatch | GoodSync | Backblaze backup
![]() ![]() ![]() |
-- opinions expressed by me are solely my own. ie - personal
Seems fine to me on 2D static
Works me me on 2deg static as well.
On static 2d fibre and no issue
Another 2d static IP address customer...
https://1.1.1.1 works fine for me also.
I wouldnt normally jump on with another "me too" since others have confirmed it, however, I also noticed that the Geekzone logo is not showing the IPv6 version. Ping to the address also times out - though Ive no idea if you allow ping to the webserver. Also noticing some other IPv6 weirdness that I havent put my finger on yet. E.g.: ping to one.one.one.one works for IPv6 but mtr gives no info at all.
Update: And now the IPv6 logo is showing 🤷
Another update: Actually its flip/flopping between showing and not. Never seen this before!
Any views expressed on these forums are my own and don't necessarily reflect those of my employer.
Works for me 2D static
Found it.
The option "Do not allow client devices to use DoH servers" blocks access to https://1.1.1.1 - I had this checked because I already have the network set to use DoH from Cloudflare Zero Trust and didn't want a device to bypass it.
Please support Geekzone by subscribing, or using one of our referral links: Mighty Ape | Samsung | AliExpress | Wise | Sharesies | Hatch | GoodSync | Backblaze backup
![]() ![]() ![]() |