Hi, I'm on Orcon with a Linksys modem/router. Lately I'm finding that my connection keeps dropping, so I pull the ADSL line out of the back of the router, plug it back in, wait a few seconds (30+?) and it usually comes back on. I'm wondering if its anything to do with line noise?

--- System Information ---
Vendor: Linksys
ModelName: WAG160N
Firmware Version: A1.00.09 , 2008-05-05T17:46:41
GUI Version: A1.00.09_007
Boot Version: 1.0.37-5.4
Hardware Version: 0.01

--- DSL Information ---
DSL Driver Version:  AnnexA version - A2pB022g.d20e
DSL VPI/VCI:         0/100
DSL Status:          ShowtimeRetrain Reason:    1
DSL Mode:            G.DMT
DSL Channel:         INTR
DSL Upstream Rate:   928 Kbps
DSL Downstream Rate: 5792 Kbps

                      Down         up   
DSL Noise Margin:     6.3 dB      10.0 dB
DSL Attenuation:     25.0 dB      10.5 dB
DSL Transmit Power:  19.6 dBm     12.6 dBm