Windows 7 WMC & Media Portal 1.0.2

Forums › Freeview (DVB-T/DVB-S) › Windows 7 WMC & Media Portal 1.0.2

gumdigger

429 posts

Ultimate Geek
+1 received by user: 3

#40569 31-Aug-2009 16:44

Just installed Windows 7 ultimate 64bit, without installing any drivers what so ever i managed to pickup freeview on media center, the reception was very stable. i was very shocked to see this. because

"orginally i had xp pro and i use to error messages like "no signal" or massive green patches in the picture. this started happening recently. so i gave up freeview as i have sky"

back to windows 7, i then sucessfully installed MP 1.0.2 but while tunning in my channels i noticed it didnt pickup any channels on both tuners. it said 538000 no signal.....same for all the other freq.

what could be the cause of this?

i have hvr2200 and xfx9600gt card.

sbiddle

30853 posts

Uber Geek
+1 received by user: 9996

Retired Mod

Trusted

Biddle Corp

Lifetime subscriber

#251997 31-Aug-2009 17:02

What sort of aerial do you have? Sounds like a possible signal problem which would explain both problems.

gumdigger

429 posts

Ultimate Geek
+1 received by user: 3

#252016 31-Aug-2009 18:06

sbiddle: What sort of aerial do you have? Sounds like a possible signal problem which would explain both problems.

I got a aerial guy to put the booster in. there was a siginificant improvement after that, tested on the uhf meter too. but as i have said WMC is working fine on freeview, that means there are no aerial issues.

sbiddle

30853 posts

Uber Geek
+1 received by user: 9996

Retired Mod

Trusted

Biddle Corp

Lifetime subscriber

#252022 31-Aug-2009 18:20

Ahh sorry didn't realise you were getting it fine on Media Center and not on Media Portal at the same time.

Dingbatt

6804 posts

Uber Geek
+1 received by user: 3694

Lifetime subscriber

#252131 1-Sep-2009 09:53

Just be aware that MP 1.0.2 is not supported for Windows 7.

http://www.team-mediaportal.com/blogs/team_blog/mediaportal_and_windows_7.html

I have got MP 1.1.0A working after a fashion on Windows7 RC. There is a good possiblity that the UAC is interfering with the operation. It certainly did with Vista when I was trying to get MP operating.

At the moment I am considering trying MP with Windows7 XP Mode.

“We’ve arranged a society based on science and technology, in which nobody understands anything about science technology. Carl Sagan 1996

sbiddle

30853 posts

Uber Geek
+1 received by user: 9996

Retired Mod

Trusted

Biddle Corp

Lifetime subscriber

#252142 1-Sep-2009 10:26

Dingbatt: Just be aware that MP 1.0.2 is not supported for Windows 7.

http://www.team-mediaportal.com/blogs/team_blog/mediaportal_and_windows_7.html

I have got MP 1.1.0A working after a fashion on Windows7 RC. There is a good possiblity that the UAC is interfering with the operation. It certainly did with Vista when I was trying to get MP operating.

At the moment I am considering trying MP with Windows7 XP Mode.

The only issue with that would probably be a lack of hardware accleration which would make it a waste of time if it's being used as a front end.

Dingbatt

6804 posts

Uber Geek
+1 received by user: 3694

Lifetime subscriber

#252275 1-Sep-2009 15:49

sbiddle:
Dingbatt: Just be aware that MP 1.0.2 is not supported for Windows 7.

http://www.team-mediaportal.com/blogs/team_blog/mediaportal_and_windows_7.html

I have got MP 1.1.0A working after a fashion on Windows7 RC. There is a good possiblity that the UAC is interfering with the operation. It certainly did with Vista when I was trying to get MP operating.

At the moment I am considering trying MP with Windows7 XP Mode.

The only issue with that would probably be a lack of hardware accleration which would make it a waste of time if it's being used as a front end.

True. I have just downloaded MP (edit: wrong version quoted)1.1.0 beta and installed it on my Windows 7 partition. It works so far but not all that smoothly. Still a bit of tweaking I think.

“We’ve arranged a society based on science and technology, in which nobody understands anything about science technology. Carl Sagan 1996

Dyson

Shop now for Dyson appliances (affiliate link).

haloo101

77 posts

Master Geek

#252556 2-Sep-2009 13:18

I just got mp 1.1.0 beta working last night.. codec that came with windows 7 didn't work, also tried shark codec which was rubbish.. so at the end go back to powerDVD codec used in XP which work great as did in XP!!

couchman75

5 posts

Wannabe Geek

#252597 2-Sep-2009 15:00

Hi Gumdigger

I have the same software combination working on my MediaCenter. Initially I had the same issue as you but I picked up a tip off the MediaPortal site, you need to install MediaPortal in XP Compatibility mode then all runs fine from there.

I now use 3 DVB-T tuners for WMC and 1 tuner reserved for MP TV Server which enables me to stream TV to other PC's in the house. I'm not running the MP front end on my mediacenter though.

Hope this helps.

Cheers
Russ..

gumdigger

429 posts

Ultimate Geek
+1 received by user: 3

#252602 2-Sep-2009 15:08

couchman75: Hi Gumdigger

I have the same software combination working on my MediaCenter. Initially I had the same issue as you but I picked up a tip off the MediaPortal site, you need to install MediaPortal in XP Compatibility mode then all runs fine from there.

I now use 3 DVB-T tuners for WMC and 1 tuner reserved for MP TV Server which enables me to stream TV to other PC's in the house. I'm not running the MP front end on my mediacenter though.

Hope this helps.

Cheers
Russ..

thank you

Dingbatt

6804 posts

Uber Geek
+1 received by user: 3694

Lifetime subscriber

#252680 2-Sep-2009 17:48

couchman75: Hi Gumdigger

I have the same software combination working on my MediaCenter. Initially I had the same issue as you but I picked up a tip off the MediaPortal site, you need to install MediaPortal in XP Compatibility mode then all runs fine from there.

I now use 3 DVB-T tuners for WMC and 1 tuner reserved for MP TV Server which enables me to stream TV to other PC's in the house. I'm not running the MP front end on my mediacenter though.

Hope this helps.

Cheers
Russ..

Are you just talking about XP compatibility or the the full XP Mode (using a virtual machine)? And did the compatibility start right from install or just when you try to run MP?

“We’ve arranged a society based on science and technology, in which nobody understands anything about science technology. Carl Sagan 1996

couchman75

5 posts

Wannabe Geek

#252763 2-Sep-2009 22:00

Yeah just the compatibility mode during install. So go to the properties of the install file and to the compatibility tab, choose "Run this program in compatibility mode for:" Windows XP SP3. Then run the install. I didn't need to do anything extra when running TV Server itself.