NO TVNZ/TV3 channels on my freeview, help~~

Forums › Freeview (DVB-T/DVB-S) › NO TVNZ/TV3 channels on my freeview, help~~

hungugu

48 posts

Geek
+1 received by user: 2

#56791 23-Jan-2010 23:23

Hi guys...have just bought a Panasonic TH-L42S10Z tv with built-in digital receiver.

After a auto-scan, I can only get Kordia channels like the Maori TV, Parliament TV, the Chinese TV etc. NO TVNZ or TV3 channels can be found...

I have noticed that on the channels I can receive, it's "CH45, 666mhz". It seems like I am getting signals from Waitarua. At MediaWorks frequency, I get very very weak signals, no channel can be found. At TVNZ frequency, I get no signals at all.

I live in South Remura, I wonder if I can get better reception if I use the Remuera transmitter rather than Waitarua? How do I change the currently "Horizontal" to "Vertical" (by this it means the aerial position? Do I just turn the aerial)?

What else do I need to check or do? Any suggestions ~?

Thanks heaps...!:D

Spyware

3818 posts

Uber Geek
+1 received by user: 1366

Lifetime subscriber

#292599 23-Jan-2010 23:33

Turn it to transmitter and then remount vertically, elements perpendicular to ground rather than parallell. Given low power of Remuera it may not be an easy repoint job.

Spark Max Fibre using Mikrotik CCR1009-8G-1S-1S+, CRS125-24G-1S, Unifi UAP, U6-Pro, UAP-AC-M-Pro, Apple TV 4K (2022), Apple TV 4K (2017), iPad Air 1st gen, iPad Air 4th gen, iPhone 13, SkyNZ3151 (the white box). If it doesn't move then it's data cabled.

hungugu

48 posts

Geek
+1 received by user: 2

#292604 23-Jan-2010 23:48

thanks heaps spyware!

Given that I can receive Kordia mux perfectly from Waitarua...is there anything I can try before I climb up to the roof?

hungugu

48 posts

Geek
+1 received by user: 2

#292607 24-Jan-2010 00:05

I have moved the tv to my bedroom and plug the cable here....I can got very crappy TV3 channels! but still no luck with TVNZ channels...

it may be a wiring issue too?

the cable between TV and wall is RG59U...no idea what kind of cable the builder used up in the roof.

Spyware

3818 posts

Uber Geek
+1 received by user: 1366

Lifetime subscriber

#292623 24-Jan-2010 07:35

hungugu: I have moved the tv to my bedroom and plug the cable here....I can got very crappy TV3 channels! but still no luck with TVNZ channels...

it may be a wiring issue too?

the cable between TV and wall is RG59U...no idea what kind of cable the builder used up in the roof.

If its RG59 then you may have to consider replacing it. Failing that see if you can find the splitter, if saddle clamp variety I would replace that and reterminate all runs with F type connectors. If any amplifiers in circuit, will be near antenna, then check to see if they have power. Maybe just reorientate antenna slightly for Waitarua and see what happens.

EDIT: Replace all fly leads first with RG6.

kiwisat

147 posts

Master Geek
+1 received by user: 2

#292925 25-Jan-2010 17:52

Call me if you have no luck. I am in Panmure and can sort it for you.

021 681371

Paul

richms

29098 posts

Uber Geek
+1 received by user: 10209

Trusted

Lifetime subscriber

#292954 25-Jan-2010 19:44

remuera and the skytower are viable options if you can see them. If not, then forget it. Also dont forget pine hill is good into most of remuera as well.

Richard rich.ms

Samsung

Shop now on Samsung phones, tablets, TVs and more (affiliate link).

hungugu

48 posts

Geek
+1 received by user: 2

#292972 25-Jan-2010 20:19

Thank you so much guys...

I finally got the RG59u cable working after redoing the plugs...I get TV3 signal quality and strength both around 4/10; TV1 a bit worse at 1-2/10 and 3/10 but I do get a viewable picture.

I have bought a 4m cable from DSE hoping it would be better than my DIY cable but it's even worse - no TV1 channels and 1-2/10 on TV3 channels! it's not RG6 though....will return tomorrow.

I am tried and satisfied for now really don't want to get up to the roof top.... @_@ thank you all for you help...:)

richms

29098 posts

Uber Geek
+1 received by user: 10209

Trusted

Lifetime subscriber

#292975 25-Jan-2010 20:26

The retail packed DSE cables are hopeless. The one I got had no shielding around it, just some copper wire that was loosely looped around the center core.

Forget anything that has a belling-lee plug on it. IMO it was stupid to perservere with those crap plugs in the digital era, but we followed europe for some reason with keeping them.

Use F connectors till the back of the TV and put an adapter on there.

Richard rich.ms