Freeview TV3

Forums › Freeview (DVB-T/DVB-S) › Freeview TV3

1 | 2

cyril7

9075 posts

Uber Geek
+1 received by user: 2499

ID Verified

Trusted

Subscriber

#200189 9-Mar-2009 17:04

Hi, it should be H not Vpol. So you have a Sky box on this setup as well, how have you split the signal.

As I said if you go to the transponder setup page and have it setup for 12456 Hpol 22500 symbolrate what quality reading do you get compared to 12483 Hpol.

Cyril

kiwis

837 posts

Ultimate Geek
+1 received by user: 12

#200193 9-Mar-2009 17:14

cyril7: Hi, it should be H not Vpol. So you have a Sky box on this setup as well, how have you split the signal.

As I said if you go to the transponder setup page and have it setup for 12456 Hpol 22500 symbolrate what quality reading do you get compared to 12483 Hpol.

Cyril

Op D1
Transponder: 3
Freq: 12456
Symbol: 22500
Polar: HOR (either this or VER)
Search Type: All
NIT: On

Freq 12456 Signal 90% Quality: 90%
Freq 12483 Signal 26% Quality: 0%

cyril7

9075 posts

Uber Geek
+1 received by user: 2499

ID Verified

Trusted

Subscriber

#200194 9-Mar-2009 17:18

So it would mostly likely seem that the skew is out, what LNB is it, what LNB settings have you got, I presume Sky installed it, how long ago.

Edit, I take it you have accidently transposed those figures as its TV3 you are having trouble with which is on 12456, TV1/2 are on 12483.

Cyril

kiwis

837 posts

Ultimate Geek
+1 received by user: 12

#200199 9-Mar-2009 17:25

Dunno, sky installed it, was here when i brought that hosue 2 years ago.

cyril7

9075 posts

Uber Geek
+1 received by user: 2499

ID Verified

Trusted

Subscriber

#200200 9-Mar-2009 17:28

And the LNB settings you have made in the FreeView STB?

Cyril

kiwis

837 posts

Ultimate Geek
+1 received by user: 12

#200201 9-Mar-2009 17:31

Setting is "Universal"

Quic Broadband

Move to New Zealand's best fibre broadband service (affiliate link). Free setup code: R587125ERQ6VE. Note that to use Quic Broadband you must be comfortable with configuring your own router.

cyril7

9075 posts

Uber Geek
+1 received by user: 2499

ID Verified

Trusted

Subscriber

#200202 9-Mar-2009 17:33

OK that could be a problem, what settings for the high and low LO freq are there and what teh switching frequency. Is there a normal LNB option other than universal

Cyril

kiwis

837 posts

Ultimate Geek
+1 received by user: 12

#200203 9-Mar-2009 17:43

Yeah Normal works and I found 3 and C4

however now I get no signal on TVNZ?

cyril7

9075 posts

Uber Geek
+1 received by user: 2499

ID Verified

Trusted

Subscriber

#200206 9-Mar-2009 17:56

So not wanting to labour the point, there are many ways both normal and universal LNBs can be setup, the details are important, what are the details of the LNB settings.

Cyril

kiwis

837 posts

Ultimate Geek
+1 received by user: 12

#200207 9-Mar-2009 18:01

cyril7: what are the details of the LNB settings.Cyril

Settings??? what details do you need?

cyril7

9075 posts

Uber Geek
+1 received by user: 2499

ID Verified

Trusted

Subscriber

#200209 9-Mar-2009 18:15

LO frequency, 22kHz tone status, infact any detail that it notes on the setup page.

Cyril

New World

Shop on-line at New World now for your groceries (affiliate link).

kiwis

837 posts

Ultimate Geek
+1 received by user: 12

#200212 9-Mar-2009 18:23

Antenna Setting

Sat: D1
Trans: 3 [12456]
LNB: Normal
Low Freq: 5150
High Freq: 10750
22: Off
0/10V: 0V
DISEqc Switch Setting: --/--
LNB Power: Auto

Is this what your after?

kiwis

837 posts

Ultimate Geek
+1 received by user: 12

#200214 9-Mar-2009 18:32

HOld on all sorted :-)

Thanks sooooo much for your help :-)

cyril7

9075 posts

Uber Geek
+1 received by user: 2499

ID Verified

Trusted

Subscriber

#200216 9-Mar-2009 18:39

Glad you sorted, it, as you have probably found, set both low and high LO to 10750 things should come right.

Cyril

Deev8

481 posts

Ultimate Geek
+1 received by user: 5

#200331 10-Mar-2009 11:23

kiwis: HOld on all sorted :-)

Thanks sooooo much for your help :-)

There may be others with a similar problem that search and find this discussion thread. So it would help them if you quickly describe what you did to get the problem sorted.

1 | 2