Prime restored on Satellite until Oct 31st

Forums › Freeview (DVB-T/DVB-S) › Prime restored on Satellite until Oct 31st

FOCUS0

64 posts

Master Geek
+1 received by user: 3

#132294 16-Oct-2013 11:03

Prime Has been restored on TP 12456 until Oct 31st

Freeview STB's that have not been factory Reset will find the channel restored.

Non-Freeview STB's will Pick up the Channel from 12456, again if they haven't been factory reset, the channel will be working again.

Note that 12456 will no longer transmit Prime from Oct 31st.

xarqi

727 posts

Ultimate Geek
+1 received by user: 7

#916074 16-Oct-2013 14:53

Sounds like a do-over, since they totally stuffed up the PR last time around.

Apsattv

2452 posts

Uber Geek
+1 received by user: 724

#916410 17-Oct-2013 05:08

Because the certified Zinwell / DSE 7500 units can't tune to the new service without applying a "hackish" fix.

oops!

tanivula

998 posts

Ultimate Geek
+1 received by user: 158

Lifetime subscriber

#927523 5-Nov-2013 11:28

Ah cool, some of my friends said they've lost Prime on their sat freeview receiver...

Any details of how to get Prime back? Don't think their one is a Freeview approved device unfortunately.

CYaBro

4708 posts

Uber Geek
+1 received by user: 1182

ID Verified

Trusted

#927529 5-Nov-2013 11:41

tanivula: Ah cool, some of my friends said they've lost Prime on their sat freeview receiver...

Any details of how to get Prime back? Don't think their one is a Freeview approved device unfortunately.

Need to tell the unit to scan transponder 12707 which has the Sky Prime feed on it, which is now unencrypted.

Opinions are my own and not the views of my employer.

Apsattv

2452 posts

Uber Geek
+1 received by user: 724

#927958 6-Nov-2013 05:41

The most sensible way is to go to 12483 H in your transponder add / edit menu set NIT on and CAS FTA only and set it searching

It should zap through all the transponders of freeview+SKY and add all fta's including Trackside and C4 you just need a cleanup at the end of the channel list once the scan has completed

This will work on pretty much ALL free to air satellite recievers