Got this bargain on TradeMe.

Forums › Freeview (DVB-T/DVB-S) › Got this bargain on TradeMe.

PaulZA

314 posts

Ultimate Geek
+1 received by user: 10

#172089 11-May-2015 17:22

Was looking at TradeMe, at Satellite dish costs, as I wanted to look beyond the D1, and never did I expect to find this.

http://www.trademe.co.nz/Browse/Listing.aspx?id=886299416

50c, for what looks like a 3m Mesh.

Now the next question is how do I go about dismantling the thing, and what tools are required?

Thanks

peterds

106 posts

Master Geek
+1 received by user: 9

#1304784 13-May-2015 20:32

I bought a 2.4m mesh dish a while ago. If you can I suggest you go and see the dish and spray every nut and bolt with CRC a few days before you dismantle it. Tools required are a socket set ,a selection of screwdrivers and large and small crescent.
I found it easier to take the dish off the pole first then dismantle it. For this you need 2 stepladders and someone to help.
Getting the pole out of the ground could be hard yakker depending on how much concrete there is !
Good luck!

Peter D Smale

Sideface

9649 posts

Uber Geek
+1 received by user: 15596

Trusted

Lifetime subscriber

#1304831 13-May-2015 21:26

I suggest that you ask the vendors what size it is, so that you can organise transportation. It may be bigger than you think.

I have to ask ... what do you want it for?

Sideface