Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


openmedia

3449 posts

Uber Geek
+1 received by user: 878

Trusted

#17727 9-Dec-2007 08:40
Send private message

Tests showed up for a few minutes on Thursday, but went live on Friday.

All 3 multiplexes are active advertising a total of 12 channels.

I'm capturing most of my tests over on the NZ DTV Forum at http://www.dtvforum.co.nz/forum/showthread.php?t=137.




Generally known online as OpenMedia, now working for Red Hat APAC as a Technology Evangelist and Portfolio Architect. Still playing with MythTV and digital media on the side.


View this topic in a long page with up to 500 replies per page Create new topic
 1 | 2 | 3 | 4 | 5 | 6 | ... | 16
itey
479 posts

Ultimate Geek
+1 received by user: 84


  #99009 9-Dec-2007 10:17
Send private message

thanks for the heads up.

what dvb-t card are you using? time to invest in one.



mcraenz
1140 posts

Uber Geek
+1 received by user: 222


  #99013 9-Dec-2007 10:35
Send private message

should a UHF amplifer/splitter cause any problems? I can't seem to get a signal using my dvico FusionHDTV PCI card. Prime  pic is clear with very miminal ghosting.






 

Help me build a better way of doing politics in Aotearoa New Zealand

 

 

 


openmedia

3449 posts

Uber Geek
+1 received by user: 878

Trusted

  #99020 9-Dec-2007 11:28
Send private message

I'm using some USB tuners at present. I have a freecom and a Hauppauge HVR 900.

Signal strength appears to be quite low at the moment, I'm reasonably close to Waiatarua.

Also make sure your signal is off there and not a local repeater.

Steve




Generally known online as OpenMedia, now working for Red Hat APAC as a Technology Evangelist and Portfolio Architect. Still playing with MythTV and digital media on the side.




walt12
324 posts

Ultimate Geek
+1 received by user: 2


  #99041 9-Dec-2007 14:27
Send private message

Same issue as mcraenz here. Using a HVR4000 and GB PVR. No signal strength even though I get UHF Prime no problems on analog tuned to 775.3125MHz (Waiatarua).

mcraenz
1140 posts

Uber Geek
+1 received by user: 222


  #99075 9-Dec-2007 17:51
Send private message

Ok well I re-installed my drivers and it's now scanning in 9 channels :-) What are the specs of the "C4" and "TV3" loops? I can play C4 fine but TV3 is very choppy.

I've also got Reserved 1KSD - Reserved 6KSD
and Reserved 1KHD

Out the 12 you got Steve what am I missing and from which mux?






 

Help me build a better way of doing politics in Aotearoa New Zealand

 

 

 


openmedia

3449 posts

Uber Geek
+1 received by user: 878

Trusted

  #99084 9-Dec-2007 18:18
Send private message

I got 3 Muxes with the following

TVNZ Mux
  • TVONE
  • TV2
  • TVNZ 6
  • TVNZ 7
  • TVNZ SPORTS EXTRA
MediaWorks Mux
  • TV3
  • C4
Kordia Mux
  • Reserved 1KSD
  • Reserved 2KSD
  • Reserved 3KSD
  • Reserved 4KSD
  • Reserved 5KSD
  • Reserved 6KSD
  • Reserved 1KHD
Don't know if it is the weather but my reception for DTT is currently stuffed.

Steve




Generally known online as OpenMedia, now working for Red Hat APAC as a Technology Evangelist and Portfolio Architect. Still playing with MythTV and digital media on the side.


 
 
 

Shop now on AliExpress (affiliate link).
walt12
324 posts

Ultimate Geek
+1 received by user: 2


  #99094 9-Dec-2007 19:03
Send private message

mcraenz: Ok well I re-installed my drivers and it's now scanning in 9 channels :-)


Ok I might start there as well.  Suspect it's the old hybrid card issue for me (given I'm utilising DVB-S as well).


openmedia

3449 posts

Uber Geek
+1 received by user: 878

Trusted

  #99245 10-Dec-2007 13:34
Send private message

Two of the multiplexes appear to be down at the moment, and on 666000000 I can get a signal but no channel scan.

Can anyone else confirm this?

Steve




Generally known online as OpenMedia, now working for Red Hat APAC as a Technology Evangelist and Portfolio Architect. Still playing with MythTV and digital media on the side.


Fossie
1240 posts

Uber Geek

Trusted

  #99256 10-Dec-2007 15:42
Send private message

hmm, i'm finding nothing :/

openmedia

3449 posts

Uber Geek
+1 received by user: 878

Trusted

  #99257 10-Dec-2007 15:50
Send private message

I can see all 3 multiplexes again, they came back on about 1:30 ish. Got nothing showing up on a channel scan though.

Steve




Generally known online as OpenMedia, now working for Red Hat APAC as a Technology Evangelist and Portfolio Architect. Still playing with MythTV and digital media on the side.


Fossie
1240 posts

Uber Geek

Trusted

  #99260 10-Dec-2007 15:54
Send private message

8Mhz?

HP

 
 
 
 

Shop now for HP laptops and other devices (affiliate link).
Fossie
1240 posts

Uber Geek

Trusted

  #99263 10-Dec-2007 16:09
Send private message

woo, got it going.
100% Signal quality
75% signal

tv1 and tv2 1920x1080 same feed? ~6mbps
tv 3 1920x1080 ~6mbps

or is my app misreading things

openmedia

3449 posts

Uber Geek
+1 received by user: 878

Trusted

  #99266 10-Dec-2007 16:11
Send private message

Fossie: woo, got it going.
100% Signal quality
75% signal

tv1 and tv2 1920x1080 same feed? ~6mbps
tv 3 1920x1080 ~6mbps

or is my app misreading things


Sounds about right. Hmm Might have some reception issues, I need to check my cables etc.





Generally known online as OpenMedia, now working for Red Hat APAC as a Technology Evangelist and Portfolio Architect. Still playing with MythTV and digital media on the side.


openmedia

3449 posts

Uber Geek
+1 received by user: 878

Trusted

  #99295 10-Dec-2007 17:54
Send private message

Ok Tuned and I've now got playback.

Needed to do a reboot as I have a feeling the DVB-T stick was a bit confused and failing to tune.

Anyhow I've got 3 different streams off the TVNZ multiplex - 2 x 1080i and 1 x 576i

The Kordia multiplex is now advertising real channels and two radio stations.

I'll try and pull some streams off MedaWorks and Kordia multiplexes tonight.




Generally known online as OpenMedia, now working for Red Hat APAC as a Technology Evangelist and Portfolio Architect. Still playing with MythTV and digital media on the side.


openmedia

3449 posts

Uber Geek
+1 received by user: 878

Trusted

  #99362 10-Dec-2007 22:53
Send private message

I've just posted a write up of my progress at http://mythtv.co.nz

Steve




Generally known online as OpenMedia, now working for Red Hat APAC as a Technology Evangelist and Portfolio Architect. Still playing with MythTV and digital media on the side.


 1 | 2 | 3 | 4 | 5 | 6 | ... | 16
View this topic in a long page with up to 500 replies per page Create new topic








Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.