Dish TV Product Changelogs (2015 Gen +)

Forums › Freeview (DVB-T/DVB-S) › Dish TV Product Changelogs (2015 Gen +)

joshhill96

You're typing with Josh!
1406 posts

Uber Geek
+1 received by user: 143

Trusted

Subscriber

Topic # 183954 4-Nov-2015 14:31

One person supports this post

This thread is to allow us to post the changelogs from our 2015 range of receivers to the customers if you need them. We will try and get this updated when available.

Please avoid creating a discussion in this thread, instead please use our already established threads below:

satbox S8200 http://www.geekzone.co.nz/forums.asp?forumid=83&topicid=175512
aerialBox T2100 http://www.geekzone.co.nz/forums.asp?forumid=83&topicid=175478
aerialBox T2200 http://www.geekzone.co.nz/forums.asp?forumid=83&topicid=179230

Software suggestions/ faults reports here: http://www.geekzone.co.nz/forums.asp?forumid=83&topicid=170896

joshhill96

You're typing with Josh!
1406 posts

Uber Geek
+1 received by user: 143

Trusted

Subscriber

Reply # 1420830 4-Nov-2015 14:34

One person supports this post

T2200 Changelog - Updated 27/11/2015

Version 1.25 26Mar16

1. When pressing the EPG button while chasing a popup will now appear asking to jump to live TV to invoke the EPG.

2. Corrected an issue where timeshifts would save in the library with auto timeshift on, when two recordings started.

3. When performing a factory default or tuning the auto timeshift now automatically discards allowing the user to perform these functions immediately.

4. Corrected an issue that caused incorrect video sizing on some media playback using the default Fit to Screen option.

5. Fixed a bug that randomly caused black screen on library playback.

6. Fixed a bug that caused the playback banner to not timeout sometimes.

7. Fixed a bug that caused issues when marking content.

8. Fixed an issue causing incorrect folder naming in series view.

9. Fixed a bug that randomly caused loss of PVR function during playback mode.

Version 1.24 26Feb16

1. Enabled a second partition to be seen for media playback.

2. Fixed bug with Auto Shutdown timer.

3. System crashed and rebooted when deleting the content from Series view during only one series group available case. Problem solved

4. Corrected the Aspect ratio in media playback.

Version 1.22 24Dec15

1. Increased the manual tuning range 474MHz to 858MHz

2. Implemented a mini info banner to make way for HBBTV applications. The extended info banner can be evoked but pressing the info button
once while the mini banner is showing or twice if no banners are on screen.

3. Minor bug fixes.

Version 1.20 07Dec15

1. Added support to save any library sorting settings.

2. Added the library function of series clubbing/grouping by pressing the blue button when viewing the the library list.

3. Minor bug fixes.

Version 1.1F 26Nov15

1. Added support to book a plus 1 channel while the same program is part way through on the standard channel.

2. Some events record twice on the standard channel then an hour later on the Plus 1 channel with the same episode ID. Problem solved

3. Updated the iManual

DIS007_10_011C 26Sep15-Fri

1. When info is pressed while recording you now get an Info bar then the second press of the info button shows Extended Service Information.

2. For small flashdrives about 96% gets reserved so almost no free space left . Problem solved

3. Recoding Status" added into the Sort and Filter options

4. When in Media center scrolling a list of videos ,after pressing the scroll key about 4 times the scrolling locks up . Problem solved

5. Sometimes the RCU keys stop responding after 3 or more days of no remote activity. Problem solved

6. Time is displayed less than one hour in channel banner but in MEHG EPG time is displayed properly. Problem solved

7. The unit will sometimes crash and reboot when deleting 200+ recordings in library dialog. Problem solved

8. Randomly OSD is not shown on CVBS. Problem solved

9. When selecting a photo in the zooming window vertical lines are erased. Problem solved

10. The RED button FreeviewPlus link in the MaoriTV application doesn't work. Problem solved

DIS007_10_011B 03Sep15-Thu

1. Sometimes unit would not boot and displays the Middleware initializing string. Problem solved

DIS007_10_011A 08Aug15-Sat

1. Changed the IRD message, which is dsplayed during the database empty condition.

2. During Recording unable to invoke the signal information menu. Problem solved

3. For the wifi password added qwerty keyboard and default to show text, and also support for the phone
style keyboard printed on the remote control to be used.

4. Changed the New Zealand country map in first time installation dialog.

5. Added a pop-up message after connection to the AP if AutoIP is used.

6. Library dialog background color changed to Gray color[Only record name/event duration].

7. Differentiated the Partially watched and watched status in library dialog.

8. Playback info banner is not timed out after fast forward and play the content. Problem solved

9. Record information is wrongly displayed in the extended info in the record library dialog. Problem solved

DIS007_10_0118 19Jul15-Sun

1. Removed the tick mark and added the right arrow for the selection banner in first time installation dialog for
country setup and network setup dialog.

2. On the Access Points page the OK button now does the same as the Connect button. If a connected AP is
highlighted and the Disconnect is showing then the OK button does nothing until the user moves off the
connected AP.

3. "R" symbol is displayed for the some of the unbooked events. Problem solved

4. Showed the service information for Tuner 1 & Tuner 2 in Extended info banner.

Josh Hill

joshhill96

You're typing with Josh!
1406 posts

Uber Geek
+1 received by user: 143

Trusted

Subscriber

Reply # 1420834 4-Nov-2015 14:39

DishTV T2100 Firmware Change Log - Updated 27/04/2016

Version 1.30 - Latest Version

Modification(s) Done
1. Support to tune the carrier from 474MHz to 858MHz in manual scan.
2. Changed the "Blue" key to invoke Options and "Green" key to invoke the Sort Window in record library dialog.
3. Changed native channel banner to a mini banner to make way for freeview plus guide.

Problem(s) Solved
1. Cannot access catchup error message display while play the "The Chase Australia" catch episode via FVP.
2. System attempting request to OND server for every 30secs polling.

Version 1.2C
1. Improved video recovery after loss in weak signal cases.
2. ADB not maintained after the bootup. Fixed

Version 1.2A

1. Removed the event progress bar in channel banner
2. Default osd time out is now 2 secs.
3. EPG button now loads the HbbTV EPG when internet is available. As per Freeview requirment.

Version 1.29

1. The RED button FreeviewPlus link in the MaoriTV application is now working correctly.

Version 1.28 Problem(s) Solved

1. Wrong time display in freeview plus EPG (7:05 instead of 17:05)
2. Off air HbbTV lancher not loading
3. Booked event name string not displayed in booked list, when discarding th current episode recording and booking that same event as series in freeview plus EPG. Modification(s) Done
1. Latest webkit migration (153k)
2. VCR recording is now supported via AV for Live TV.

Josh Hill

joshhill96

You're typing with Josh!
1406 posts

Uber Geek
+1 received by user: 143

Trusted

Subscriber

Reply # 1420836 4-Nov-2015 14:42

S8200 Firmware Release History Updated 27/04/2016

Version 1.1E - LATEST April 22nd 2016

1. Library did not refreshed the recorded content status after completing the playback while a recording is in progress. Fixed

2. System displays the No signal message while switching from horizontal carrier to vertical carrier after stop the recording. Fixed

3. Integrated the Latest iManual packages for S8200 application.

Version 1.1C

1. Improve the key response during PVR playback.

2. Unable to switch to vertical carrier after stop the recording in horizontal carrier. Fixed

3. Signal inconsistent problem is observed in Satellite scan list. Fixed

Version 1.1B

1. In recorded series and by clicking this all episodes.

2. Support for Smart Zoom(Fit to Screen) & Original (Actual Size) aspect ratio in media player.

3. Improved functionality of the Channel Organizer.

4. Audio cannot be switched between codecs when playing a file. Fixed

5. Unable to login the "TVNZ portal" page during No signal condition with the default time as 1970. Fixed

6. Some of the events displayed duplicately in record library dialog during second record starts in presence of library dialog. Fixed.

Version 1.1A

1. System displayed the “Only two recordings allowed” popup message during channel switching while dual recordings were inprogress and Auto Timeshift recording is ON. Problem solved

2. Recording from AV output on live TV Enabled.

3. Updated the iManual

4. Random SATA HDD detection Failure during AC power reset. Problem solved

5. Random audio out of sync issue. Problem solved

6. Unable to login to the "TVNZ portal" during No signal condition with the default time as 1970. Problem solved

Version 1.19

1. When info is pressed while recording you now get an Info bar then the second press of the info button shows Extended Service Information.

2. Time is displayed less than one hour in channel banner but in MEHG EPG time is displayed properly. Problem solved

3. When in Media center scrolling a list of videos ,after pressing the scroll key about 4 times the scrolling locks up . Problem solved

4. Recoding Status" added into the Sort and Filter options.

5. For small flashdrives about 96% gets reserved so almost no free space left . Problem solved

6. Sometimes the RCU keys stop responding after 3 or more days of no remote activity. Problem solved

7. The unit will sometimes crash and reboot when deleting 200+ recordings in library dialog. Problem solved

8. Randomly OSD is not shown on CVBS. Problem solved 9. When selecting a photo in the zooming window vertical lines are erased. Problem solved

Version 1.16

1. During Recording unable to invoke the signal information menu. Problem solved

2. WiFi password keyboard updated to qwerty keyboard and default to show text, and also support for the phone style keyboard printed on the remote control.

3. Library dialog background color changed to Gray color[Only record name/event duration].

4. Differentiated the Partially watched and watched status in library dialog.

5. Changed the IRD message, which is dsplayed during the database empty condition.

6. Playback info banner is not timed out after fast forward and play the content. Problem solved

7. Record information is wrongly displayed in the extended info in the record library dialog. Problem solved

Version 1.15

1. Sometimes system hangs and RCU and Front panel keys do not responded. In front panel STBY string only displayed. Problem solved

2. System hangs in active stby mode during event based timer recording in passive standby mode. Problem Solved

3. Modified the font size bigger for Playback – 2x and seek time stamp.

4. When doing the Seek, fast forward then play the seek timestamp is not disabled. Problem solved

Josh Hill