HVR4000 Powerlink Cinema no dvb-t and dvb-s found

Forums › Freeview (DVB-T/DVB-S) › HVR4000 Powerlink Cinema no dvb-t and dvb-s found

jozef

9 posts

Wannabe Geek

#22309 23-May-2008 14:46

Hi,
I installed HVR4000 and Powerlink Cinema 5.1, that come a long with card.
All drivers installed successfully, but when I'm running the setup the Powerlink Cinema detects only Analog Tuner,
No DVB-t and dvb-s, Do I miss something, do I need addtionall drivers??
Cheers
Jozef

mentalinc

3384 posts

Uber Geek
+1 received by user: 1023

Trusted

#132808 23-May-2008 14:55

jozef:
No DVB-t and dvb-s, Do I miss something

Yes you have missed alot.
http://www.geekzone.co.nz/forums.asp?ForumId=83&TopicId=19328

CPU: AMD 5900x | RAM: GSKILL Trident Z Neo RGB F4-3600C16D-32GTZNC-32-GB | MB: Asus X570-E | GFX: EVGA FTW3 Ultra RTX 3080Ti| Monitor: LG 27GL850-B 2560x1440

Quic: https://account.quic.nz/refer/473833 R473833EQKIBX

talsemgeest

75 posts

Master Geek

#132843 23-May-2008 17:14

So a quick roundup of what you still need: Either GB-PVR, Media Portal or DVBViewer, Cyberlink PowerDVD 7 or 8 Ultra Delux, and the Monogram AAC decoder.

Oh, and you need a compatible graphics card as well.

DS248

1702 posts

Uber Geek
+1 received by user: 771

Lifetime subscriber

#132853 23-May-2008 18:48

jozef: I installed HVR4000 and Powerlink Cinema 5.1, that come a long with card.
All drivers installed successfully, but when I'm running the setup the Powerlink Cinema detects only Analog Tuner,
No DVB-t and dvb-s, Do I miss something, do I need addtionall drivers??

Have you installed the latest drivers & patches? ie.

Step 1: Install latest driver - Version 2.122.26109
From http://www.hauppauge.co.uk/pages/sup...iversonly.html

Step 2: Install three downloads from http://www.hauppauge.co.uk/pages/sup...satellite.html

+ PowerCinema 5.1 Software Upgrade CD v1.0 (build 4222) to CD v1.4 (build 4410)
+ PowerCinema 5.1 Software Patch, Transponder list update for New Zealand FTA channels
+ PowerCinema HD edition with AAC+ No Audio Patch

Plus, for satelite (from same link)
+ PowerCinema 5.1 Registry Override for 10750 Type LNB
+ PowerCinema 5.1 Registry Override for 11300 Type LNB

Also see post re PowerCinema HW acceleration (sticky post above)

I have no experience with DVB-S, but PowerCinema (with the above patches etc) should work fine with appropriate hardware. We have it working for both the HVR4000 and Nova T500.

jozef

9 posts

Wannabe Geek

#132959 24-May-2008 10:41

Hi all,
thank you very much for all you help.
Looks like I got the problem with Powerlink Cinema 5.1, that does not detects all the tuners on HVR4000
I installed all the updates from UK website and still nothing.
I installed as well all the other staff mentioned in earlier posts.
I'ts is all workinng fine with DVBviewer, but I would prefer use Powerlink Cinema as it comes with Remote Control.
Also DVBviewer, not working well with DVB-S, does not have Optus D1 in a list and is hard to get working at the same time for both dvb-s and dvb-t.
I tried as well other software "My Theatre", and that looks good as well, but also no Optus D1 in a list.
SO mayor for me is that Powerlink Cinema does not detects dvb-t and dvb-s. Any help will be appreciated.

talsemgeest

75 posts

Master Geek

#132963 24-May-2008 11:02

You can't use DVB-T in New Zealand with anything other than GB-PVR, Media Portal or DVBViewer. Powercinema will not work.

DS248

1702 posts

Uber Geek
+1 received by user: 771

Lifetime subscriber

#132990 24-May-2008 12:37

talsemgeest: You can't use DVB-T in New Zealand with anything other than GB-PVR, Media Portal or DVBViewer. Powercinema will not work.

What is the basis of the "will not work"?

PowerCinema (+ HVR4000 or Nova T500) works fine with DVB-T in NZ if properly configured as I noted above. We have it working on 2 PC's - excellent PQ (720p & 1080i). Only thing not functional is the MHEG EPG. All other aspects work - TV viewing, timeshift, record TV & playback (audio & video).

Geekzone support

Support Geekzone with one-off or recurring donations Donate via PressPatron.

talsemgeest

75 posts

Master Geek

#132991 24-May-2008 12:40

Oh really? Cool.