Try searching Geekzone

'Vu Solo Sky Card' found plenty of info for me.

I did thanks, but nothing i can understand

Mavarick:

 

I did thanks, but nothing i can understand

 

I don't think there are any settings. I think you just need the appropriate NZ Firmware installed.

http://www.freeviewnz.com/html/help_desk.html   

http://www.freeviewnz.com/html/vu-_solo.html

Thanks B1GGLZ ,

Had seen that site, but earlier it was not the up to date image I thought it was, but seems to be so will give a go later

regards

I have downloaded,

Mostly all working however I still some set advice, as sky channels are still blocked, (show key symbol. when it switched to that channel)

thanks

Thanks to Peter at Satlink, it turns out my card cannot be decoded, bugger,

If you have one of the new decoders, the cards used in those all seem to be usable in third-party card readers.  I had to update Oscam to handle my new card when I got the new decoder, but my patch has long since been incorporated and current Oscam versions should work.  So maybe your Vu Solo2 needs a software update to get a recent version of Oscam.  You also do need to specify the boxid=xxxxxxxx line in your oscam.server file, where the xxxxxxx is the hexadecimal conversion of the boxid found in your Sky box's system menu somewhere.

Seems my NZ07 card should work as per the satlink webpage,

still need to explore more as its its new to me, my 3rd party box is a VU solo2 with NZ firmware.

@fe31nz, will PM sometime soon for some explainations

regards

Hi Maverick.

You shouldn't have any problems configuring the Solo2 to be used with your Skycard.

Have had a Solo2 for past 3 years running via Oscam.

Basically all you need to correctly configure is the CAID for Sky 096A

BoxID I never had to worry about at all.

Cheers:

EDIT MOD: please respect company names as per our FUG

Rentakill:

 

Hi Maverick.

 

You shouldn't have any problems configuring the Solo2 to be used with your Skycard.

 

Have had a Solo2 for past 3 years running via Oscam.

 

Basically all you need to correctly configure is the CAID for Sky 096A

 

BoxID I never had to worry about at all.

 

 

 

Cheers:

 

 

 

EDIT MOD: please respect company names as per our FUG

 

And that is what i dont know how to do :(

Finally got it working in the end, thanks for all the help. if you have a later sky card (NZ07K***) I now have relevant files

cheers