I've tried looking through the forums for help but nothing atm seems to work. Just got the HVR-4000 hooked up to my sky dish today. Scanned for channels on DVB-T in Power Cinema and it comes up with a channel list and the EPG but no picture (sound was jerky until I tried the hardware acceleration thread help) I have installed PowerDVD so i have the H.264 Codec. I have the very latest update for Power Cinema not 4410 its like for 46 something, could this be the problem?
Yes I've been confused since I got my TV card. Can both DVB-T and DVB-S pick up the EPG? Which one is best for me to try and use? If I can pick the EPG and I have sound, I should be halfway there right?
Ok so I DVB-T from the VHF aerial which is plugged in the analogue port on my HVR-4000 and DVB-S comes from my sky dish into the sat port on the card right?
I've done this: http://www.freeviewshop.co.nz/forum/index.php/topic,413.0.html word for word but cant get it to work. How can I tell what type my LNB is? If i try the first reg hack and then try the second, will it overwrite the first reg hack? Is the Sat always Optus D1? Also read that the dish lnb should have power, is this true for NZ sky dishes? Cos mine doesnt.
Cheers for any help.
*edit* ok just set the lnb to 11300 and when scanning for DVB-S it comes up with 85channels and it did show some pictures in the scan preview. But when I tried to view channels I couldnt see or hear anything. Also pretty much all the channels it found were the Sky Digital channels (which are locked) the ones that arent locked are Stratos, Parliment TV, Cue, Te Reo, TV3, C4, and 3 other ones called Program 404554753, 404554766, and 404555631. So no TVNZ channels.
at the mo I have gotten this far I have the EPG and channels and sound going but the picture is quite jerky for DVB-T. For a few seconds its ok, then it breaks up, pauses and kinda keeps doing that. I can pick up the channel list for DVB-S but the picture only shows up in the preview scanning window, not when actually wanting to watch TV. Does anyone know how to fix this?
Twitter and LinkedIn »
Follow us to receive Twitter updates when new discussions are posted in our forums: