Geekzone: technology news, blogs, forums
Guest
Welcome Guest.
You haven't logged in yet. If you don't have an account you can register now.


simouse

3 posts

Wannabe Geek


#25029 9-Aug-2008 23:35
Send private message

I couldn't work out my remote, now i suspect it's the receiver's problem. I notice there are Three Led on the stick. when it works, i only can see two are on. one is blue and the other is green, the last one is dark. not sure if this means the receiver function of the stick is broken. Despite this, it works perfectly to get the freeview HD channels.  

Create new topic
TinyTim
1058 posts

Uber Geek
+1 received by user: 166

Trusted

  #155798 11-Aug-2008 09:25
Send private message

simouse: I couldn't work out my remote, now i suspect it's the receiver's problem. I notice there are Three Led on the stick. when it works, i only can see two are on. one is blue and the other is green, the last one is dark. not sure if this means the receiver function of the stick is broken. Despite this, it works perfectly to get the freeview HD channels.  

 

I have 2 LEDs and one IR receiver on my 4 day old HVR900. Do you have the hauppauge IR software loaded?





 



simouse

3 posts

Wannabe Geek


  #156372 12-Aug-2008 19:21
Send private message

TinyTim:

simouse: I couldn't work out my remote, now i suspect it's the receiver's problem. I notice there are Three Led on the stick. when it works, i only can see two are on. one is blue and the other is green, the last one is dark. not sure if this means the receiver function of the stick is broken. Despite this, it works perfectly to get the freeview HD channels.  


I have 2 LEDs and one IR receiver on my 4 day old HVR900. Do you have the hauppauge IR software loaded?



Yes, i have loaded all the softwares, just wonder if this IR receiver lights on when it works. Cheers.

franz
1 post

Wannabe Geek
Inactive user


  #163216 9-Sep-2008 06:39
Send private message

Hi guys,

 I have the same problem as simouse. I run the software on a laptop, with XP pro OS.
The hardware goes (more or less) smooth, except for the remote control.
From what I gather the third "led" is an ir sensor. Is it expected to blink or something when it
receives a signal from the remote??
Simouse did you succeed in having the remote work?

I have also a software problem (I think). The epg function does weird things. It apparently sweeps the available
frequencies, and it takes a reasonable time (a few minutes) to get to 100%. After that it gets somewhat stuck,
and grinds on forever. I never succeeded in getting an epg page.

Thanks for any hint

F



Create new topic








Geekzone Live »

Try automatic live updates from Geekzone directly in your browser, without refreshing the page, with Geekzone Live now.



Are you subscribed to our RSS feed? You can download the latest headlines and summaries from our stories directly to your computer or smartphone by using a feed reader.