Also, is http://www.jayx.co.nz/ still in business?

Thank you for the suggestion.

Phone calls to all listed numbers, email using listed email address before posting question probably constitutes trying to contact them. 

AlanL:

 

Older model Ultraplus x9200 HD reports a problem with the T2 slot. If this is a hardware problem, what part number should I seek to replace it?

 

What is the error message?

What firmware is it using etc etc?

have you tried http://ultrapower.co.nz

Last question first: Yes and working through.

Firmware version:

2.12.18

Errors:

Service not found when using T2

Error reported on restart: "T2 slot has the problem. Please re-insert tuner after checking"

Symptoms:

Recording three channels produces error. Third channel on T2 creates record file but the file only contains header data and no file data.

Tests done:

Swapped T2 tuner into T1 slot. Picture is shown, so it looks like the problem is not with the tuner card.

Have you done a factory reset?

also check the tuner loopthru cable at the back

Check the cable at the back.  When you swapped tuners, did you still have the same problem with the same slot?

Jack at Ultrapower still has (had) terrestrial tuner modules.

@AlanL - how did you get an EPG with the ultraplus and using terrestrial?