Hi, I recently got the LKV379P-DVB-TV2 from PB Tech and I'm having some issues getting it to work as it should.

I use it to take an HDMI Input (From a PC or Chromecast) and change it to an HD TV signal that I view on the 2 TVs I have downstairs. But after a few days or even a few hours of it working perfectly, it suddenly gives me No Signal or is Pixelated on both TV's. I also have Freeview running from a UHF Antenna on the roof which then leads to a splitter where I have my Modulator, both TV's and Antenna cables connected to. 

In terms of settings on the Modulator, I have left everything as Default apart from the Service Name (WTV 1) and LCN (21). I have made sure that there aren't any of the Freeview channels on that frequency and I have been bouncing around different frequencies all getting the same problem before returning to the default.

I live in the Porirua Area so I'm probably getting Freeview from Baxters Knob or Mt Kau Kau. From what I can see the Freeview channels are on 28, 29, 32, 33, 34, 35, 36, 37, 38, and 39. So I've been trying on 25 (Default), 31, and 42. All of which worked for a short period of time before giving me the same issue.

I'm not sure if this is because there is something I'm missing or if my Modulator is Faulty.

Much appreciated, Daniel.