Has SBS gone?

Forums › Freeview (DVB-T/DVB-S) › Has SBS gone?

semigeek

1606 posts

Uber Geek

#77713 21-Feb-2011 11:46

Last night, after running a splitter on my satellite cable, I could get SBS One and Two. Now I can't even get a signal on either decoder. Has SBS gone?

GeekGuy

590 posts

Ultimate Geek

#441877 21-Feb-2011 12:00

Its still there !

semigeek

1606 posts

Uber Geek

#441882 21-Feb-2011 12:06

Not on either of my decoders it isn't. I can get epg data for it, but no pictures. Comes up no signal. All the other channels are fine.
I'm using 12648 v 12600.

davidcole

6029 posts

Uber Geek

Trusted

#441883 21-Feb-2011 12:06

the other device of the splitter (or the splitter itself) might be setting the polarity wrong.

Previously known as psycik

Home Assistant: Gigabyte AMD A8 Brix, Home Assistant with Aeotech ZWave Controller, Raspberry PI, Wemos D1 Mini, Zwave, Shelly Humidity and Temperature sensors
Media:Chromecast v2, ATV4 4k, ATV4, HDHomeRun Dual
Server Host Plex Server 3x3TB, 4x4TB using MergerFS, Samsung 850 evo 512 GB SSD, Proxmox Server with 1xW10, 2xUbuntu 22.04 LTS, Backblaze Backups, usenetprime.com fastmail.com Sharesies Trakt.TV Sharesight

LookingUp

411 posts

Ultimate Geek

#441885 21-Feb-2011 12:07

Set both decoders to SBS and see what you get. SBS is on a different polarity to NZ channels, and if one of the decoders has your LNB tied up on an NZ channel you probably won't be able to see SBS with the other.

Things are LookingUp.... A photo from my back yard :-)

Jaxson

8041 posts

Uber Geek

Trusted

#441888 21-Feb-2011 12:09

semigeek: I can get epg data for it, but no pictures.

This may be buffered still from the last time it worked.

Any other device connected to Sky or normal freeview channels will hold the LNB in the Horizontal alignment so you will not be able to receive the Vertical where SBS lives. Some decoders hold the Horizontal even when they are in standby/off mode.

semigeek

1606 posts

Uber Geek

#441896 21-Feb-2011 12:20

LookingUp: Set both decoders to SBS and see what you get. SBS is on a different polarity to NZ channels, and if one of the decoders has your LNB tied up on an NZ channel you probably won't be able to see SBS with the other.

That worked.