openbox S10

Forums › Freeview (DVB-T/DVB-S) › openbox S10

petersh

6 posts

Wannabe Geek

#93185 15-Nov-2011 18:27

I'm trying to hook up a 320g hdd to my openbox S10 for PVR and it is not reading the drive. Tried both NTFS and FAT32. Anyone got any suggestions?
Cheers
Pete

Jaxson

8041 posts

Uber Geek

Trusted

#545714 15-Nov-2011 18:56

Can the unit format the drive itself? Some have seriously odd file systems, though most read FAT32 at least.

Mantis

96 posts

Master Geek

ID Verified

#548233 22-Nov-2011 08:45

I have the Openbox S9 and it only seems to work with drives with an external power supply.

Jaxson

8041 posts

Uber Geek

Trusted

#548237 22-Nov-2011 08:54

Seems common:
openbox-s10-wont-recognise-external-hard-drive

These guys are the NZ agents for Ultraplus etc, and include the openbox S9 unit on their site:
openbox-s9-hd-pvr

GeekGuy

590 posts

Ultimate Geek

#548298 22-Nov-2011 10:33

Have you tried changing the firmware ? mind you its ok as long as you have dont have a clone s9/s10 box.
I have had a s10 for a while now. The only problem I have with it is when I record something it cannot play back properly I get an error stating something like my 'HDD speed not fast enough'.
I have tried most of the s10 firmware with mixed results and have read s9 firmware works on it and am now trying different s9 firmware.

petersh

6 posts

Wannabe Geek

#548598 22-Nov-2011 18:39

Thanks for suggestions. Updated firmware and still doesn't work with the WD 320g drive. Works with Toshiba drive and with memory stick, but not the one I want.
Thanks again
Pete

Jaxson

8041 posts

Uber Geek

Trusted

#548613 22-Nov-2011 19:06

Trademe it and buy something else?

seldog

5 posts

Wannabe Geek

#556649 11-Dec-2011 17:09

i have the s9 running HDS2_SCMT_20110315.abs firmware, with external 2tb hdd, and it can record and play back fine, i just googled the firmware and downloaded it