I can't find any option in the web management interface to disable the arp-proxy "feature" which is causing some headaches with the advanced routing I want to do.
To be more clear:
This is the ARP table on my laptop (64 is a phone, 100, 111 and 112 are wired devices)
? (192.168.1.1) at 0:22:6b:e7:e6:c7 on en1 ifscope [ethernet]
? (192.168.1.64) at 4:1e:64:7f:20:e2 on en1 ifscope [ethernet]
? (192.168.1.100) at 0:22:6b:e7:e6:c7 on en1 ifscope [ethernet]
? (192.168.1.111) at 0:22:6b:e7:e6:c7 on en1 ifscope [ethernet]
? (192.168.1.112) at 0:22:6b:e7:e6:c7 on en1 ifscope [ethernet]
As you can see, the WAG310 is advertising its own mac address for the whole subnet.
In the status page of WAG310g I see:
*** Arp Cache Table on the host 'lan_host_ins1' has 7 entries ***
IP Address MAC Address Interface Age (seconds)
192.168.1.112 08.00.27.A4.26.9F 192.168.1.1 270
192.168.1.100 00.1C.C4.50.EF.63 192.168.1.1 214
192.168.1.64 04.1E.64.7F.20.E2 192.168.1.1 100
192.168.1.1 00.22.6B.E7.E6.C7 192.168.1.1 Permanent
192.168.1.111 00.1C.C0.6F.F4.28 192.168.1.1 104
192.168.1.99 D8.A2.5E.8D.D4.DF 192.168.1.1 276
My laptop has the .99 IP address.
Any ideas on this one please?