Help please: Handset gets no signal outside Auckland after ROM upgrade

Forums › Android › Help please: Handset gets no signal outside Auckland after ROM upgrade

1 | 2

Jezsikat

24 posts

Geek

#540262 2-Nov-2011 11:26

Anyone?

sbiddle

30853 posts

Uber Geek
+1 received by user: 9996

Retired Mod

Trusted

Biddle Corp

Lifetime subscriber

#540886 3-Nov-2011 20:38

Your best bet if probably to send it away as a repair to have the proper firmware and baseband config loaded on it.

firefuze

510 posts

Ultimate Geek
+1 received by user: 85

#541515 5-Nov-2011 20:04

Settings > About > what does your baseband version state?

Dial *#*#0011#*#* to see what frequency band your phone is connected to, check if it connects to any 850 band sites?

You could also check this link to check 850 band is enabled, also did you do a factory data reset after flashing the uploaded firmware?

Short of these options, as mentioned getting it sent in to Telegistics.

Jezsikat

24 posts

Geek

#541992 7-Nov-2011 12:45

firefuze: Settings > About > what does your baseband version state?

Dial *#*#0011#*#* to see what frequency band your phone is connected to, check if it connects to any 850 band sites?

You could also check this link to check 850 band is enabled, also did you do a factory data reset after flashing the uploaded firmware?

Short of these options, as mentioned getting it sent in to Telegistics.

Baseband: I9000TDOJV4

WCDMA im presuming? is WCDMA 2100 Band 1

And i have done that link too :(

PS just did the factory reset too so if thats all correct ill retest it this weekend again.

1 | 2