Celestial Teapot Rom onto Vodafone 845 via Mac???

Forums › Android › Celestial Teapot Rom onto Vodafone 845 via Mac???

kempywanga

11 posts

Geek

#71711 15-Nov-2010 22:00

As mentioned above...

I have spent a couple of hours trying to figure out how to get this all up and running.

Issues:
-Cant find a 'superboot' download.
-Im running a Mac and have little knowledge of the basic operating of a Mac required to install superboot and the likes.
-I just cant find a clear step by step guide that would make the whole thing more painless than it currently is.

Any ideas, help or guidance?

Chur chur,
Kempy.

langers1972

1039 posts

Uber Geek

#405185 16-Nov-2010 08:38

Just follow instructions here, all you need to do is copy the zip files onto your SD card in the phone so it's pretty irrelevant what OS is on your PC/Mac

kempywanga

11 posts

Geek

#405238 16-Nov-2010 11:27

They are the directions I keep coming back to. I don't quite understand step 1. i.e. Flash a recovery image (tested with AmonRA.)
What is this actually directing me to do. When I start to go further down the rabbit hole of using AmonRa it talks about 'Superbooting' the phone and other things. So step one is where Im really not sure what processes to follow.

Chur,
Kempy

langers1972

1039 posts

Uber Geek

#405255 16-Nov-2010 12:12

It has step by step instructions:

How to install - Windows, Linux and OSX

* Download the recovery image of your choice above and extract the zip file
* Put your device in bootloader mode - turn if off, then tap the powerbutton while holding the 'Volume Down' and 'End (Red)' keys
* MAC - Open a terminal window to the directory containing the files, and type 'chmod +x install-recovery-mac.sh' followed by './install-recovery-mac.sh'

That bit just backs up your current phone, you then copy the Teapot ROM zip file onto your SD Card and follow the steps, easy

kempywanga

11 posts

Geek

#405412 16-Nov-2010 16:35

Sweet. Mission accomplished. How does the installation of the overclocking files work?

kyhwana2

2566 posts

Uber Geek

#405426 16-Nov-2010 16:53

kempywanga: Sweet. Mission accomplished. How does the installation of the overclocking files work?

Just install it the same way you did the ROM. Boot into recovery and select Flash update from zip and use the zip file that you copied onto the SD card for OCing

langers1972

1039 posts

Uber Geek

#405507 16-Nov-2010 19:15

I have mine on 691Mhz and it works fine

grudge

266 posts

Ultimate Geek

#405611 16-Nov-2010 23:19

710mhz, fine here.