Hiding a WiFi device inside a wall

Forums › Home Workshop DIY › Hiding a WiFi device inside a wall

1 | 2

neb

11294 posts

Uber Geek

Trusted

Lifetime subscriber

#2702684 6-May-2021 00:07

neb: From the photo of the Ali one it looks about the same quality as the Vynco one I've got now for power, meaning cheap and flimsy in both cases. I'm not expecting much, but as long as it's no worse than the power board next to it I'll be fine.

Just drooling over what I could get if I was in this US, e.g:

Steel latching door with Gib stopping bead integrated into it

Same but with a white frame and tabs you can bend around the Gib to hold it in place

For anyone actually contemplating getting one of those, beware that the dimensions are misleading, it's the outside of the frame and not the opening like you'd expect and like sellers on eBay and Aliexpress advertise.

Yoban

447 posts

Ultimate Geek

#2702798 6-May-2021 08:56

have used these in the past https://www.jaycar.co.nz/sealed-polycarbonate-enclosure-171-x-121-x-55/p/HB6218 for similar problem, just not recessed, but possible. They also do a clear lidded version too.

Fred99

13684 posts

Uber Geek

#2702811 6-May-2021 09:18

Marine chandleries stock a range of sizes and shapes of plastic hinged hatch covers and enclosures.
Not the kind of place that's top of the mind when looking for something for a wifi enclosure and marine stuff is generally on the pricey side, but if there was something the right size that looks good the high-ish price might be worth the saving in mucking around.

Arsonist

31 posts

Geek

#2702830 6-May-2021 09:54

I would recommend looking at the recessed boxes that go behind wall mounted TVs. Pop into any electrical wholesaler, they should all have stock.

For example https://www.matchmaster.co.nz/accessories/04mm-hmh01/

https://dynamix.co.nz/avb300

The benefit is they have provision to install a power outlet inside the box if needed, or just put "brush plates" like this for cables to come through: https://dynamix.co.nz/FP-BRUSHP

DonH

230 posts

Master Geek

Lifetime subscriber

#2702852 6-May-2021 10:48

neb: Just drooling over what I could get if I was in this US, e.g:

Steel door and Wifi? Depends on which direction your Wifi AP is...

People hear what they see. - Doris Day

itxtme

2102 posts

Uber Geek

#2702885 6-May-2021 12:45

neb:
neb: From the photo of the Ali one it looks about the same quality as the Vynco one I've got now for power, meaning cheap and flimsy in both cases. I'm not expecting much, but as long as it's no worse than the power board next to it I'll be fine.
Just drooling over what I could get if I was in this US, e.g: Steel latching door with Gib stopping bead integrated into it Same but with a white frame and tabs you can bend around the Gib to hold it in place For anyone actually contemplating getting one of those, beware that the dimensions are misleading, it's the outside of the frame and not the opening like you'd expect and like sellers on eBay and Aliexpress advertise.

There are numerous sellers of those in NZ. Maybe bigger than what you wanted, but Potters sell a 200x200 with plasterboard bead - https://potters.co.nz/product-collection/hardedge-hatch/

I am actually using one to hide the central heating controllers in our hallway. Will need shims for the 13mm vs 10mm gib

neb

11294 posts

Uber Geek

Trusted

Lifetime subscriber

#2703109 6-May-2021 23:08

itxtme:
There are numerous sellers of those in NZ. Maybe bigger than what you wanted, but Potters sell a 200x200 with plasterboard bead - https://potters.co.nz/product-collection/hardedge-hatch/

That looks pretty impressive, but unfortunately with a price to match...

Equinox IT

Cloud spending continues to surge globally, but most organisations haven’t made the changes necessary to maximise the value and cost-efficiency benefits of their cloud investments. Download the whitepaper From Overspend to Advantage now.

neb

11294 posts

Uber Geek

Trusted

Lifetime subscriber

#2703592 8-May-2021 01:29

Found an even better one that's just a flat panel that can be painted over, which means WAF is pretty good. However, this also creates a crossover to the What are some particularly egregious examples of 'kiwi tax' thread. Prices:

Placemakers: $145

Bunnings: $77

Amazon: $9

No, that's not a typo: Placemakers have a 1,100% markup, Bunnings merely put a 540% markup on it (with the USD price converted to NZD).

chevrolux

4962 posts

Uber Geek
Inactive user

#2703615 8-May-2021 08:24

Ask your sparky to get it for you from a trade store. They are certainly not that expensive.

1 | 2