Paradox Alarm - assigning zones to sleep alarm

Forums › Home Workshop DIY › Paradox Alarm - assigning zones to sleep alarm

davidcole

6041 posts

Uber Geek

Trusted

#175431 29-Jun-2015 15:09

Anyone know how to do this?

I've go the IP150 module - and while it allows me to arm the system fully or in sleep mode, it doesn't seem to have anything for assigning what sensors are activated in sleep mode.

I've also got access to babyware for my system...a look through there allowed me to zone sensors - which I read as partitioning, but again nothing jumped out at me to say when activating sleep mode include this, this and that sensor.

Previously known as psycik

Home Assistant: Gigabyte AMD A8 Brix, Home Assistant with Aeotech ZWave Controller, Raspberry PI, Wemos D1 Mini, Zwave, Shelly Humidity and Temperature sensors
Media:Chromecast v2, ATV4 4k, ATV4, HDHomeRun Dual
Server Host Plex Server 3x3TB, 4x4TB using MergerFS, Samsung 850 evo 512 GB SSD, Proxmox Server with 1xW10, 2xUbuntu 22.04 LTS, Backblaze Backups, usenetprime.com fastmail.com Sharesies Trakt.TV Sharesight

mdooher

Hmm, what to write...
1425 posts

Uber Geek

ID Verified

Trusted

Lifetime subscriber

#1333504 29-Jun-2015 15:24

What model do you have?
But what you are looking for is the zone definitions

A "zone" is a single sensor, a partition is a group of zones that act like a completely separate installation

A zone can be set as instant, delay, stay, 24 hour fire etc. this controls how it acts when you say arm the system. for instance in stay mode just the perimeter sensor/zones will cause an alarm

Matthew

davidcole

6041 posts

Uber Geek

Trusted

#1333514 29-Jun-2015 15:38

mdooher: What model do you have?
But what you are looking for is the zone definitions

A "zone" is a single sensor, a partition is a group of zones that act like a completely separate installation

A zone can be set as instant, delay, stay, 24 hour fire etc. this controls how it acts when you say arm the system. for instance in stay mode just the perimeter sensor/zones will cause an alarm

The SP5500

I've just had another look in babyware.

Yeah I get that with the zones, so if they're all currently set to entry delay, with smokes set for 24 fire. I still don't get the link on how to say when I sleep arm, I want zone 1 armed, but zone 3 is off (as it's upstairs).

mdooher

Hmm, what to write...
1425 posts

Uber Geek

ID Verified

Trusted

Lifetime subscriber

#1333516 29-Jun-2015 15:42

davidcole:
mdooher: What model do you have?
But what you are looking for is the zone definitions

A "zone" is a single sensor, a partition is a group of zones that act like a completely separate installation

A zone can be set as instant, delay, stay, 24 hour fire etc. this controls how it acts when you say arm the system. for instance in stay mode just the perimeter sensor/zones will cause an alarm

The SP5500

I've just had another look in babyware.

Yeah I get that with the zones, so if they're all currently set to entry delay, with smokes set for 24 fire. I still don't get the link on how to say when I sleep arm, I want zone 1 armed, but zone 3 is off (as it's upstairs).

you need to set the zone 3 to be a sleep zone or a "stay" zone

Matthew

davidcole

6041 posts

Uber Geek

Trusted

#1333522 29-Jun-2015 15:48

mdooher:
davidcole:
mdooher: What model do you have?
But what you are looking for is the zone definitions

A "zone" is a single sensor, a partition is a group of zones that act like a completely separate installation

A zone can be set as instant, delay, stay, 24 hour fire etc. this controls how it acts when you say arm the system. for instance in stay mode just the perimeter sensor/zones will cause an alarm

The SP5500

I've just had another look in babyware.

Yeah I get that with the zones, so if they're all currently set to entry delay, with smokes set for 24 fire. I still don't get the link on how to say when I sleep arm, I want zone 1 armed, but zone 3 is off (as it's upstairs).

you need to set the zone 3 to be a sleep zone or a "stay" zone

Under the zone type? I see Follow (Sleep / Full Arm) and Instant (Sleep / Full arm) they seem to be the only things that mention sleep.

mdooher

Hmm, what to write...
1425 posts

Uber Geek

ID Verified

Trusted

Lifetime subscriber

#1333527 29-Jun-2015 15:56

PM sent

Matthew

mdooher

Hmm, what to write...
1425 posts

Uber Geek

ID Verified

Trusted

Lifetime subscriber

#1333539 29-Jun-2015 16:03

Follow (Full Arm) Zones Upon regular arming, the zone is Follow Upon Stay or Sleep arming, the zone is bypassed by the system.

This is what you want

Matthew

davidcole

6041 posts

Uber Geek

Trusted

#1333541 29-Jun-2015 16:09

mdooher: Follow (Full Arm) Zones Upon regular arming, the zone is Follow Upon Stay or Sleep arming, the zone is bypassed by the system.

This is what you want

Yeah replied in PM something to that effect, The Entry Delay (Full Arm) sounded similar to what you have point out.

Sharesies

Trade NZ and US shares and funds with Sharesies (affiliate link).

mdooher

Hmm, what to write...
1425 posts

Uber Geek

ID Verified

Trusted

Lifetime subscriber

#1333546 29-Jun-2015 16:12

The trick is in understanding what "follow" does, have a look at my explanation in my PM and then check out the manual... you should get it in no time

Matthew