is this for a beginner?

Forums › Vetta and Quic › is this for a beginner?

1 | 2 | 3

173 posts

Master Geek
+1 received by user: 37

Lifetime subscriber

#3340783 9-Feb-2025 15:51

My Asus router connection settings (Wan) give me "automatic IP", "Static IP", "PPPoE", "PPTP", and "L2TP"

Can someone tell which to choose for Quic "untagged" connection?

thanks,
David

RunningMan

9187 posts

Uber Geek
+1 received by user: 4840

#3340784 9-Feb-2025 15:53

Automatic.

EDIT: Or PPPoE. Either will work but Automatic (i.e. DHCP is generally better).

RunningMan

9187 posts

Uber Geek
+1 received by user: 4840

#3340786 9-Feb-2025 16:08

OldGeek:That is incorrect. I got support from Voyager on this, even though there was no obligation for them to do so, in contrast to Quic.

I'm very mindful of derailing this thread, however think this point needs addressing to cover off that any ISP does not in general support any router other than their own. The key here is in the first post of the linked thread.

OldGeek: I therefore made the decision to move to Voyager and their router

I don't dispute you got support from Voyager, but you got it because it was their router, which is exactly what I'd said.

The inference is that Quic provides a whole lot less support to configure your own router, but in fact they are no different to any other ISP that expects BYO router.

Any ISP that supplies a router will provide some level of support for configuring it. Any ISP that doesn't supply a router won't provide that support, and Quic is by no means a minority in this respect.

michaelmurfy

meow
13581 posts

Uber Geek
+1 received by user: 10914

Moderator

ID Verified

Trusted

Lifetime subscriber

#3340796 9-Feb-2025 17:04

OldGeek:
RunningMan:

There's a whole thread on this over here but to summarise, this was a case of the user activating a router setting that slowed the connection down. The only time you are going to get support from any ISP on this sort of issue is where they have supplied the router, and in all likelihood the support will likely be reset the router to factory defaults.

That is incorrect. I got support from Voyager on this, even though there was no obligation for them to do so, in contrast to Quic. Using your parlance, Voyager is no just any ISP.

I just want to point out one thing that has been pointed out already:

If you were with Vetta directly I suspect you would actually have a similar experience as Voyager in help configuring your router because many full support ISP's will try and help to the best of their extent but doesn't mean their support knows how to support every router out there. Quic don't provide any support apart from if you've got connection issues or a fault. You're also paying more with Voyager than you would with Quic (another $108 per year on their 300/100Mbit plan).

I agree, Quic ain't for everyone but your experience isn't Quic's fault considering they've set the expectations before you joined and there was another option for you with joining an ISP for slightly more per month but still $1 less than Voyager based on their 300/100Mbit plan where you've got full support if required.

If you're either happy to learn, or happy to manage your own connection (there is also now a pretty good Discord community that can provide some help) then Quic is for you else there are many other providers like Vetta, Voyager, Spark, One NZ, 2degrees etc that can take you as a customer too and offer a bit more hand holding if required.

ISP's can get support wrong too like my recent example with Skinny: Skinny! Where's the support?!

Michael Murphy | https://murfy.nz
Referral Links: Quic Broadband (use R122101E7CV7Q for free setup)

Are you happy with what you get from Geekzone? Please consider supporting us by subscribing.
Opinions are my own and not the views of my employer.

michaelmurfy

meow
13581 posts

Uber Geek
+1 received by user: 10914

Moderator

ID Verified

Trusted

Lifetime subscriber

#3340801 9-Feb-2025 17:20

RunningMan:

Automatic.

EDIT: Or PPPoE. Either will work but Automatic (i.e. DHCP is generally better).

I'm thinking PPPoE will be better in this case.

So if you pick VLAN 10 on signup and just stay with PPPoE things will still work once you're moved across to Quic and there will only be a brief outage as your connection switches across. The router should be able to offload PPPoE so there shouldn't be any performance drop or anything.

Davoid

173 posts

Master Geek
+1 received by user: 37

Lifetime subscriber

#3340886 10-Feb-2025 06:36

Okay, I am going to make the move. (will leave at PPOE on joining at this stage and maybe change later)

I was thinking that I have to give spark 30 days notice, so would set up Quic to start about 1 week before the final Spark cancellation. This was to give me time to sort out any possible connection issues with Quic, before losing internet access (I have my old Spark router that I could plug in to use if necessary).

Stupid idea or maybe sensible?

Also one other question, should I also select "static IP" when joining if only doing general internet (no web site etc.)? or can you change to static IP later?

again thanks for all the help,
David

Samsung

Shop now on Samsung phones, tablets, TVs and more (affiliate link).

ssamjh

358 posts

Ultimate Geek
+1 received by user: 174

ID Verified

Trusted

#3340893 10-Feb-2025 08:00

Davoid:

Okay, I am going to make the move. (will leave at PPOE on joining at this stage and maybe change later)

I was thinking that I have to give spark 30 days notice, so would set up Quic to start about 1 week before the final Spark cancellation. This was to give me time to sort out any possible connection issues with Quic, before losing internet access (I have my old Spark router that I could plug in to use if necessary).

Stupid idea or maybe sensible?

Also one other question, should I also select "static IP" when joining if only doing general internet (no web site etc.)? or can you change to static IP later?

again thanks for all the help,
David

No need for a static IP for general Internet usage.

1 week before is smart. But sign up to Quic first before giving notice to the losing service provider.

Whitianga, Coromandel - Quic Rocket1G - Ref (free setup): R893192EGADLZ

Smokeping: Quic / Voyager / Starlink

Coromandel Webcam Network

hsvhel

1273 posts

Uber Geek
+1 received by user: 596

ID Verified

#3340926 10-Feb-2025 10:41

OldGeek:

I would like to provide an alternative viewpoint. This is the short version of my experience.

I was briefly with Quic but had to move because I could not work out why my router would not connect. Back to hot spotting with my phone in the interim.

I moved to Voyager. It took a day to get their router couriered to me, when it arrived the port from Quic to Voyager had already been done. Plugged it in and full service provided. Some months later, having had problem-free service from Voyager, I tested the TP-LINK router and got it working with Voyager's assistance. So the rental router went back to Voyager.

I have only ever had to talk to Voyager 2 or 3 times. The person on the other end clearly has technical knowledge. They are never reading from a script and if they ever suggest a router reboot it is only after router config changes have been made. Coming from Sky broadband the person answering the phone at Voyager is the equivalent of tier 2 or 3 support from Sky (2D).

Just quickly on this, it may have been the VLAN setting causing your issue from being a plug and play. In the some of the TP link firmware, the VLAN setting is in the IPTV section.....it caught me, spent a little while trolling the menus.

Referral Link Quic

Free Setup use R502152EQH6OK on check out

Davoid

173 posts

Master Geek
+1 received by user: 37

Lifetime subscriber

#3341080 10-Feb-2025 13:20

Just a follow up on where I am now. I rang Spark to check on the 30 days notice (I still have 2 weeks till next cycle, (essential fibre)) and they were fine with me closing the account now and not paying any further amount for next month. The person asked why I was wanting to leave, so I told him as I can get a better rate at the other provider as I am now on the pension (this is true) and needed to look closer at my expenses, and he offered me a new much better rate for the next twelve months (no fixed term).

I am still going to look at moving to Quic, but it now takes away the more urgent need to do so.

Thanks again for all the help,
David

Davoid

173 posts

Master Geek
+1 received by user: 37

Lifetime subscriber

#3406774 23-Aug-2025 15:27

With Spark having increased the Fibre cost by $5.00 a month, it looks as if it is time to make the move to Quic. I would look at moving a week or two before Spark contract ends.

My ONT connection for Spark is through the GE1 connection on the Chorus Model 200 ONT, I believe I can request for Quic to use the GE2 connection so I still have access if needed to use Spark via GE1, is this correct? Does using another connection cause speed or connection issues and can you request to change back to GE1 with Quic after all is working well?

Hopefully Quic are not increasing there price in the near future.

Thanks for any advice,
David
(I use an Asus RT-AX5400 router)

farcus

1626 posts

Uber Geek
+1 received by user: 437

#3406846 23-Aug-2025 19:16

Davoid:

Thank you all for the help, I will do some more thinking on this, but would really like to make the change.

I was thinking of moving to Skinny Broadband, but a lot of reviews are not good for them. I do have a mobile account with them for about a year now and have had no problems. I did try phoning them to discuss there Broadband but could never get through.

thanks again,
David

I'm currently in the process of moving from Skinny to Quic
Nothing wrong with Skinny - they have been great for me for the past 8 years. No real issues to speak of. Only moving because they have just bumped up their prices and are no longer any cheaper than other options (although don't use cgnat so that is a positive for them over others at same price-point).

If you are not sure about Quic - they are owned and run by Vetta who do have an offering with full support

Geekzone

Want to support Geekzone and browse the site without the ads? Subscribe to Geekzone now (monthly, annual and lifetime options).

Asteros

363 posts

Ultimate Geek
+1 received by user: 189

#3406953 23-Aug-2025 23:18

Davoid:

With Spark having increased the Fibre cost by $5.00 a month, it looks as if it is time to make the move to Quic. I would look at moving a week or two before Spark contract ends.

My ONT connection for Spark is through the GE1 connection on the Chorus Model 200 ONT, I believe I can request for Quic to use the GE2 connection so I still have access if needed to use Spark via GE1, is this correct? Does using another connection cause speed or connection issues and can you request to change back to GE1 with Quic after all is working well?

Hopefully Quic are not increasing there price in the near future.

Thanks for any advice,
David
(I use an Asus RT-AX5400 router)

Costs are increasing for all Fibre internet companies. It wouldn’t be a huge surprise to see Quic increase their prices as well. Probably matching the $5 Spark increase I suspect. Also Vetta, the group owners of Quic, offer Fibre Internet with a support desk. I like Quic, but maybe check Vetta’s plans out before committing to Quic, especially if you are providing your own tech support and are not confident configuring your router.

michaelmurfy

meow
13581 posts

Uber Geek
+1 received by user: 10914

Moderator

ID Verified

Trusted

Lifetime subscriber

#3406954 23-Aug-2025 23:27

I think if you’re willing to learn and know the basics (eg, how to configure your router) then you’re totally fine with Quic.

I’ve known so many people who have joined Quic not knowing much, but wanting to learn who now have full blown homelabs from taking recommendations on their Discord.