Fibre working over Wifi, not LAN

Forums › Spark New Zealand (including Skinny and BigPipe) › Fibre working over Wifi, not LAN

arcon

423 posts

Ultimate Geek

#230685 8-Mar-2018 14:21

My Fibremax is working over Wifi with the HG659b anywhere, but not over lan. Lan1 is connected from the modem to my workstation's GbE port & green lit. It can't be a house wiring issue as the modem's internet is working in my room... it must be a PC config issue yes? I am using Win7 pro 64 bit.

lan error

1 | 2 | 3

12999 posts

Uber Geek

ID Verified

Trusted

Lizard Networks

#1971233 8-Mar-2018 14:23

Do you have any vlan tagging and/or static ip set on the LAN interface?

#include <std_disclaimer>

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.

macuser

2120 posts

Uber Geek

#1971234 8-Mar-2018 14:23

You likely have a statically assigned IP address

arcon

423 posts

Ultimate Geek

#1971249 8-Mar-2018 14:38

hio77:

Do you have any vlan tagging and/or static ip set on the LAN interface?

Not sure:

tcpipv4

hio77

12999 posts

Uber Geek

ID Verified

Trusted

Lizard Networks

#1971251 8-Mar-2018 14:42

That looks ok.

I'd check the cable.

do a ipconfig /release ipconfig /renew.

#include <std_disclaimer>

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.

Stu

Hammered
8333 posts

Uber Geek

Moderator

ID Verified

Trusted

Lifetime subscriber

#1971254 8-Mar-2018 14:49

hio77:

That looks ok.

I'd check the cable.

do a ifconfig /release ipconfig /renew.

Typo? Surely that'd be -

ipconfig /release

ipconfig /renew

ifconfig being a linux/unix thing?

People often mistake me for an adult because of my age.

Keep calm, and carry on posting.

Referral Links: Sharesies - Backblaze -

Are you happy with what you get from Geekzone? If so, please consider supporting us by subscribing.

No matter where you go, there you are.

epr

260 posts

Ultimate Geek

#1971258 8-Mar-2018 14:53

My routers network ports all died once. The lights on the router stopped working too. Stupid question you have used those ports before right?

hio77

12999 posts

Uber Geek

ID Verified

Trusted

Lizard Networks

#1971271 8-Mar-2018 14:56

Stu:

Typo? Surely that'd be -

ipconfig /release

ipconfig /renew

ifconfig being a linux/unix thing?

bingo.. wouldn't guess where i normally run those sorts of commands would you...

Thanks for the correction @freitasm...

#include <std_disclaimer>

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.

Equinox IT

Cloud spending continues to surge globally, but most organisations haven’t made the changes necessary to maximise the value and cost-efficiency benefits of their cloud investments. Download the whitepaper From Overspend to Advantage now.

arcon

423 posts

Ultimate Geek

#1971277 8-Mar-2018 15:04

Stu:

hio77:

That looks ok.

I'd check the cable.

do a ifconfig /release ipconfig /renew.

Typo? Surely that'd be -

ipconfig /release

ipconfig /renew

ipconfig /renew:

an error has occurred while renewing the interface Local Area Conection : unable to contact your DHCP server. Request has times out.

Its not the cable or the ports, these have all been tested.

One thing I noticed in Win7 Network and Sharing Center, Local Area Connection is defined as unidentified network, not part of Home or Work etc. Could that have anything to do with it?

yitz

2074 posts

Uber Geek

#1971289 8-Mar-2018 16:01

If you haven't already, try the built in Windows 7 troubleshooting tools.

In Control Panel search for 'network troubleshooting' or go into the Network and Sharing Center and choose the 'Troubleshoot problems' option near the bottom.

It doesn't look like the port has died physically as the network adapter/interface is showing up according to the status screenshot above.

trig42

5809 posts

Uber Geek

ID Verified

#1971296 8-Mar-2018 16:16

Have you got another device you can test it with?

arcon

423 posts

Ultimate Geek

#1971299 8-Mar-2018 16:20

yitz: If you haven't already, try the built in Windows 7 troubleshooting tools. In Control Panel search for 'network troubleshooting' or go into the Network and Sharing Center and choose the 'Troubleshoot problems' option near the bottom. It doesn't look like the port has died physically as the network adapter/interface is showing up according to the status screenshot above.

I used the troubleshooter, coudln't resolve the problem below:

Local Area Connection doesn't have a valid IP configuration - Not Fixed X

I also found out how to specify LAN priority over wireless but that didn't fix it (I have a wireless adapter in the PC).

I remember years ago (different PC) I could only ever get wired connections working by setting an IP address and gateway... I'm willing to be it would work if I did that. I've contacted Spark & they suggested trying the modem on another PC which I'm about to do, but that doesn't prove anything.

hio77

12999 posts

Uber Geek

ID Verified

Trusted

Lizard Networks

#1971304 8-Mar-2018 16:34

arcon:

I'm willing to be it would work if I did that. I've contacted Spark & they suggested trying the modem on another PC which I'm about to do, but that doesn't prove anything.

this would confirm if it's a PC issue or possibly something else.

This is sounding very PC related.

#include <std_disclaimer>

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.

arcon

423 posts

Ultimate Geek

#1971386 8-Mar-2018 19:58

hio77:

this would confirm if it's a PC issue or possibly something else.

This is sounding very PC related.

ok lan does work on another win7 PC which is bizarre. I can log in to the modem and it says my PC is connected via both wireless and ethernet, so the ethernet is definitely working, it just won't allow the internet through it. i've tried disabling the firewall as well as my PCIe wireless card, no effect.