Spark, convert copper phone to fibre, have ETP box.

Forums › Spark New Zealand (including Skinny and BigPipe) › Spark, convert copper phone to fibre, have ETP box.

1 | 2 | 3 | 4 | 5

840 posts

Ultimate Geek
+1 received by user: 219

#1337054 4-Jul-2015 19:18

You wouldnt expect the Power Providers or the Power Lines Companys to rewire or extend the house wireing when you want to change the service they deliver eg 1 phase to 3 because that might be economicaly better - then why do people expect the Communications Retail Service providers or one of the Network Companies (even if it is the biggest) to do the same for communications cableing?

richms

29099 posts

Uber Geek
+1 received by user: 10211

Trusted

Lifetime subscriber

#1337071 4-Jul-2015 20:31

If the power company only did half of an install because they had not got their act together with providing a complete service despite knowing for close to a decade that they would need to have it sorted, then I would expect them to come back and finish the job that they should have done at installation time.

To expect spark customers to pay to get the wiring sorted out now that they have to move to fiber landline instead of copper is just rude.

Richard rich.ms

MrJohn

77 posts

Master Geek
+1 received by user: 4

#1337100 4-Jul-2015 21:52

Now just supposing that Spark never do get around to have someone finish the job here is there anything I should know about connecting my house wiring to the POTS socket on the ONT? Of course I would cut the house wiring where it connects to the outside world.

Taking it easy in Ashburton

InstallerUFB

840 posts

Ultimate Geek
+1 received by user: 219

#1337192 5-Jul-2015 07:02

richms: If the power company only did half of an install because they had not got their act together with providing a complete service despite knowing for close to a decade that they would need to have it sorted, then I would expect them to come back and finish the job that they should have done at installation time.

To expect spark customers to pay to get the wiring sorted out now that they have to move to fiber landline instead of copper is just rude.

To actualy complete the intercconnections at time of install and leave the end customer with no phone service at all, because they wernt cuting over to voip yet would be better ?

BTW this doesnt just apply to Spark Customers - there are many who either choose not to have their lines cut over at the time of install (Split providers of their current services etc) and then request a change or intergration later on.

InstallerUFB

840 posts

Ultimate Geek
+1 received by user: 219

#1337193 5-Jul-2015 07:46

MrJohn: Now just supposing that Spark never do get around to have someone finish the job here is there anything I should know about connecting my house wiring to the POTS socket on the ONT? Of course I would cut the house wiring where it connects to the outside world.

Im in the process of writeing a quick guide to doing a DIY interconnect of a standard chorus install (as it was done 6mths ago and as its done today) to the legacy house wireing.

I'll have it finished by mid week and ill link it up here for those who want to have a go.

MrJohn

77 posts

Master Geek
+1 received by user: 4

#1337197 5-Jul-2015 08:07

Thanks, I will be looking forward to that!

Taking it easy in Ashburton

Geekzone support

Support Geekzone with one-off or recurring donations Donate via PressPatron.

MrJohn

77 posts

Master Geek
+1 received by user: 4

#1338022 6-Jul-2015 16:54

16:50 I thought I should call Spark and see what was happening with the fault reported by customer care last week. Following their instructions I called 120 using the phone plugged into the ONT. I selected the 'fault on this number' option and got through to someone who told me they could not help because they are the copper people and the phone has already been changed to fibre! So they have put me on call back for someone from the fibre division.

Taking it easy in Ashburton

MrJohn

77 posts

Master Geek
+1 received by user: 4

#1338061 6-Jul-2015 17:42

17:40 The fibre person called me and now I am waiting for a call from an 'engineer'.

Taking it easy in Ashburton

MrJohn

77 posts

Master Geek
+1 received by user: 4

#1338671 7-Jul-2015 16:49

16:50, Another day and nothing heard from the 'engineer'.

Taking it easy in Ashburton

BarTender

3629 posts

Uber Geek
+1 received by user: 2572

ID Verified

Trusted

Lifetime subscriber

#1338940 7-Jul-2015 22:10

MrJohn: 16:50, Another day and nothing heard from the 'engineer'.

And a private message unread for 3 days.

MrJohn

77 posts

Master Geek
+1 received by user: 4

#1339018 8-Jul-2015 08:05

Sorry old chap but I had to really search to find the private message indicator.

Taking it easy in Ashburton

Dyson

Shop now for Dyson appliances (affiliate link).

old3eyes

9158 posts

Uber Geek
+1 received by user: 1364

Subscriber

#1339073 8-Jul-2015 09:06

I just switched the M-in-Laws phone to fiber phone yesterday for next week. The email I got back from Downer implies that the street connection from the demark point is going to be left intact as they say to buy a RJ11 to RJ11 and plug that into the POTS1 port of the ONT and her DECT set..

I was hoping just to plug a RJ11 into the ONT and a BT into the BT jack by the ONT (the first street feed jack) so the the rest of the house could be fed that way but i suspect if the street cable is still attached there could be noise or worse on the line.. As she only uses cordless phones these days going into the ONT only may be fine..

Regards,

Old3eyes

linw

2893 posts

Uber Geek
+1 received by user: 1205

#1339120 8-Jul-2015 09:58

Go to the master socket and disconnect the street feed yourself!

old3eyes

9158 posts

Uber Geek
+1 received by user: 1364

Subscriber

#1339214 8-Jul-2015 12:37

linw: Go to the master socket and disconnect the street feed yourself!

Unfortunately i live in Auckland and she doesn't otherwize i would have..

Regards,

Old3eyes

MrJohn

77 posts

Master Geek
+1 received by user: 4

#1340283 9-Jul-2015 21:53

I received an email yesterday (8th) 18:45 telling me that Chorus were arranging for a wiring order to be drawn up to have the wiring completed. They will advise when they will do it.

Nothing heard today.

Taking it easy in Ashburton

1 | 2 | 3 | 4 | 5