#
I am new to VOIP and i am trying to setup my VFX trunkline through my Trixbox (running on VMware) on my Laptop to use with Xlite. Now I have also connected my Nokia Phone as an extension. I have followed Tony's setup for Dummies(me in this case). and currently i am able to call from my softphone to my cellphone via the Trixbox PBXfree but my trunk it self is not registering to the VFX server.
In the asterisk info in sip Peers it shows the following:
Host Username Refresh State Reg.Time
as.wxcnz.net:5060 995XXXXX 120 Auth. Sent
Also my Trunk Details are as follows:
General Settings
Outbound Caller ID: 995XXXXX(My Number)Never Override Caller ID: Checked
Outgoing Dial Rules
Empty
Outgoing Settings
Trunk Name: VFXPeer Details:
allow=ulaw&alaw
canreinvite=no
disallow=all
dtmfmode=rfc2833
fromdomain=as.wxcnz.net
fromuser=995XXXXX
host=as.wxcnz.net
insecure=invite,port
nat=yes
secret=XXXXXXXXXXXXXXXXXXXX
type=peer
context=from-trunk
username=XXXXXXXXXXXXXXXXXX
Incoming Settings
User Context: XXXXXXXXXXXXXXXXXXUser Details:
empty
Registration
Register String:995XXXXX:XXXXXXXXXXXXXXXXXXXX:XXXXXXXXXXXXXXXXXX@as.wxcnz.net/995XXXXX
In the Trunk details my username is 18 chars and my secret is 20 chars long
If someone could help me with this it would be great.
Thanks
Gaurav Bradoo
Retired Mod
Trusted
Biddle Corp
