[WXC/VFX] 3cx xnet ?

Forums › One New Zealand (including Vodafone, WxC, Farmside) › [WXC/VFX] 3cx xnet ?

jasonsti

54 posts

Master Geek

#39152 10-Aug-2009 15:36

any one got 3cx going to work with xnet?
if have can some one post the config instructions...
thanks advance

1 | 2 | 3

3267 posts

Uber Geek

Trusted

#244840 10-Aug-2009 16:46

VFX will only work with approved hardware, or with special request with Astrisk (i.e. they provide no technical support). It will not work with any soft phone unless you find a way of emulating approved hardware which will be a security risk for VFX so they will shut you down as soon as they discover you are emulating it.

You can never have enough Volvos!

jasonsti

54 posts

Master Geek

#244850 10-Aug-2009 16:58

i have heard some one has done it with 3cx as 3cx is a windows base pbx software, very similar to astrisk

sbiddle

30853 posts

Uber Geek

Retired Mod

Trusted

Biddle Corp

Lifetime subscriber

#244868 10-Aug-2009 17:35

3CX is supported on the DVX platform.

To use it with VFX you will have to request an Asterisk account and deal with all support issues yourself.

jasonsti

54 posts

Master Geek

#244874 10-Aug-2009 17:43

i have a asterisk account already i been runing trixbox, but fail to register with 3cx not sure why the error log say 404 not found strange, any suggestions sbiddle?

sbiddle

30853 posts

Uber Geek

Retired Mod

Trusted

Biddle Corp

Lifetime subscriber

#244894 10-Aug-2009 18:27

I've spent a fair bit of time playing with it recently but haven't actually bothered registering it with VFX since I had no need.

All I can say is that it can't be hard! :-)

Sorry I won't get a chance to look at it any time in the next few days, there was a post here in the past with somebody asking the same thing which somebody may have replied to.

jasonsti

54 posts

Master Geek

#244904 10-Aug-2009 18:40

yeah cheers for the effort, i have ready that post already but no real answer to the question, I will have a play, see what happen, if i figure out will post here, i am there is people out there want to use a windows base ip pbx rather then setup a box just for pbx wasting power..

if you have time please do have a look and share the result.

cheer mate

sbiddle

30853 posts

Uber Geek

Retired Mod

Trusted

Biddle Corp

Lifetime subscriber

#244965 10-Aug-2009 21:16

I've been playing with it incase I ever need to support a 3CX system and will write up a blog post with some settings when I get some time.

Unfortunately I'm very busy this week so I doubt I'll get a chance to have a look at it until the weekend.

Quic Broadband

Move to New Zealand's best fibre broadband service (affiliate link). Free setup code: R587125ERQ6VE. Note that to use Quic Broadband you must be comfortable with configuring your own router.

jasonsti

54 posts

Master Geek

#244992 10-Aug-2009 22:09

sounds good mate.

joshp

205 posts

Master Geek

Trusted

WorldxChange

#245099 11-Aug-2009 09:49

There are a number of users using 3CX on VFX/DVX, unfortunately I myself have never played with it so I can't give you much in the way of direction, but be assured that it does indeed work :)

http://wxc.co.nz

jasonsti

54 posts

Master Geek

#247106 16-Aug-2009 03:12

any updates guys?

dazzap

7 posts

Wannabe Geek

#250377 25-Aug-2009 15:05

Since no seems interested in helping with this for free, I'll give a $50 petrol voucher to the first person who can provide enough information to get my VFX trunk working on a 3CX system so I am able to make and receive calls.

PM me to make contact.

Thanks.

sbiddle

30853 posts

Uber Geek

Retired Mod

Trusted

Biddle Corp

Lifetime subscriber

#250387 25-Aug-2009 15:21

I assume you have an Asterisk VFX account?

I forgot all about this, I'll have a look into it tonight.

dazzap

7 posts

Wannabe Geek

#250388 25-Aug-2009 15:22

Correct. Asterisk VFX ready to go.

sbiddle

30853 posts

Uber Geek

Retired Mod

Trusted

Biddle Corp

Lifetime subscriber

#250576 26-Aug-2009 07:56

I had a brief play with this last night. I had inbound calls working fine but then broke them getting outbound going so I'll need to check my settings again.

After looking at the SIP traffic I had to change a couple of the outgoing SIP field strings from AuthID to the external line number (many VoIP operators use the extn/phone number for both) but then broke incoming and get a 404 error when 3CX tries to register for inbound.

Hopefully I'll get a chance to have a play tonight, it will be something simple I've configured incorrectly!

jasonsti

54 posts

Master Geek

#250610 26-Aug-2009 10:14

looking forward to hear the result

1 | 2 | 3