Hi Kevin,

While we are not able to fully support the setup of Non-Trustpower supplied routers, there should not be any reason why you cannot use the Nighthawk router on a Trustpower UFB Service.

I believe following settings/configuration should work for configuring the Nighthawk for a Trustpower UFB Service:

Ensure the WAN Port is plugged directly to the LAN1 Port on the ONT

Under Advanced-> Setup -> Internet Setup

Does your Internet Connection require a login? No
Internet IP Address: Get Dynamically from ISP
DNS Address: Get Automatically from ISP
Router MAC Address: Use Default Address

Click Apply/Save

Under Advanced -> Advanced Setup -> VLAN/IPTV Settings

Enable VLAN/IPTV Setup - Tick to Enable
Select "BY VLAN Tag group"

This may already be set up, if so - Just tick to Enable
If not: Add the below

Name: Internet
VLAN ID: 10
Priority: 0
Wired Ports: All
Wireless: All

Click Apply (Would suggest to reboot the router once this is done)

Please Note - If you are switching from another router that is currently connected/online, You may need to wait up to 5 minutes for the New Router to be able to authenticate.

Hopefully the above settings should get you all up and running with the Nighthawk Router

Thanks

Tane