WAG54GP2 firmware anywhere?

Forums › VoIP › WAG54GP2 firmware anywhere?

greg.ewing

4 posts

Wannabe Geek

#148546 23-Jun-2014 09:32

Hi I'm wanting to get rid of the VFX specific code in one of these to go back to default unprovisioned code and none of the magic resets will do this for me. WAG54GP2V2 hardware.
Anyone have a copy of the 2.01.06 or similar code in their archive? (Had it about 3 computers ago I think...)

Help appreciated ! Greg

_Allan

153 posts

Master Geek

Trusted

#1072410 23-Jun-2014 10:11

I found this on google.

http://ftpsearch.lkdev.com/ftpsearch.php?query=wag54gp2v2&sortby=filename&sortby=path&sortby=path

It give a sorry message at the top of the page, but down the page further it appear to have the files.

_Allan (my blog, my tweets, company tweets, company web site)
Geekzone Speedtest - Download: 16.28 mbps Upload: 5.86 Mbps

RunningMan

8955 posts

Uber Geek

#1072863 23-Jun-2014 19:20

I didn't think that these settings were hard coded in the firmware. Generally you just enter the provisioning URL and it goes and grabs the settings from WXC's server. You'll get locked out of the voice module settings, but a hard reset normally clears it.

Again, from memory if you are no longer using a device for VFX, let them know and I think they will load a default profile so it clears the settings if it tries to contact their provisioning server...

greg.ewing

4 posts

Wannabe Geek

#1116865 27-Aug-2014 21:20

Still having no joy on this - For the ftp's suggested the file won't load into router. There is a helluva lot of rubbish in supposed file archives that is just advertising teasers or worse.

Running Man there is no provisioning server in the router - this may have been in WXC's web setup from their services but this in definitely not in the router screens.
I'm pretty sure the firmware is set to point to the WXC server and anyway there is only one voice line showing and it keeps popping up this pap login when you try admin mode.
I've tried getting this so-called voice admin menu on a phone connected to a line port, but cannot make that work ever. Not sure how fussy it is with phone type and the secret codes (was it several *'s, forgot for now). Also could be the NZ routers had a version without the voice admin perhaps?

If anyone has the firmware it would be the real answer, as the correct one will work if reloaded. Otherwise I just cannot utilise these otherwise very handy routers.
:{ Greg

coffeebaron

6233 posts

Uber Geek

Trusted

Lifetime subscriber

#1116875 27-Aug-2014 21:41

Have your tried the IVR? Dial **** then RESET
Have you tried holding in the reset button for greater than 30sec?

Rural IT and Broadband support.

Broadband troubleshooting and master filter installs.
Starlink installer - one month free: https://www.starlink.com/?referral=RC-32845-88860-71
Wi-Fi and networking
Cel-Fi supply and installer - boost your mobile phone coverage legally

Need help in Auckland, Waikato or BoP? Click my email button, or email me direct: [my user name] at geekzonemail dot com

greg.ewing

4 posts

Wannabe Geek

#1116919 27-Aug-2014 23:34

Gave it a pretty good go once before with various lengths of reset, never got any sort of voice menu or even sign of it. A bit suspicious it either only applies to the ATA product, not the WAG54, or some other version of firmware.
I can try again I guess.