stevehodge:

JonoNZ: Another resync this morning, looks like another DLM change, DLM-2 now

Yes, looks like DLM-2. You'll probably get put on DLM-1 on Saturday morning.

JonoNZ:

stevehodge:

JonoNZ: Another resync this morning, looks like another DLM change, DLM-2 now

Yes, looks like DLM-2. You'll probably get put on DLM-1 on Saturday morning.

Looks like your were right! Another resync this morning, looking like DLM-1 with a slight drop in sync speed:

Bearers generic info DS US
Payload rate [Kbps]: 47328 10337
Attenuation [dB]: 11.0 23.0
Margins [dB]: 12.0 16.4
Output power [dBm]: 13.5 -4.1

Number of bearers: 1
Bearer 0 DS US
INP [DMT symbols]: 0.00 0.00
Delay [ms]: 0.00 0.00
Depth []: 1 0.00
R: 0 0

SamF: Hmm, if you want to stay on DLM-1 (if it's not too late already), you'll need to increase your SNRM to get those errors down!

Dairusire: So, I'm a little confused about some stuff thats happening with my VDSL connection. I recently moved to a new provider, full flavour media. Which seems great so far. 

The problem I've been coming across so far is with the new modem I've been sent out, I get a 0 on my attenuation, be it upstream or down stream. Result of this is far greater speeds that I've ever recieved before. But I'm getting rather high error rates.... Modem is a Innbox V50-U


any ideas? Put on a faulty port or faulty modem? I would assume even though the modem might not be reading the Error rates propperly, surely the port does...

nitrotech:

Dairusire: So, I'm a little confused about some stuff thats happening with my VDSL connection. I recently moved to a new provider, full flavour media. Which seems great so far. 

The problem I've been coming across so far is with the new modem I've been sent out, I get a 0 on my attenuation, be it upstream or down stream. Result of this is far greater speeds that I've ever recieved before. But I'm getting rather high error rates.... Modem is a Innbox V50-U


any ideas? Put on a faulty port or faulty modem? I would assume even though the modem might not be reading the Error rates propperly, surely the port does...

Known fault in the innbox firmware it doesn't display attenuation correctly - mine also shows 0 and has since day one.

You're on DLM-1 and I have also noticed that since i've been moved my bits down and error rates for down no longer show.

I think your box is fine just some bugs in the firmware related to stats, I have the same problems as you but connection is rock solid and fast so i'm really not worried about it.

Dairusire: So, I'm a little confused about some stuff thats happening with my VDSL connection. I recently moved to a new provider, full flavour media. Which seems great so far. 

The problem I've been coming across so far is with the new modem I've been sent out, I get a 0 on my attenuation, be it upstream or down stream. Result of this is far greater speeds that I've ever recieved before. But I'm getting rather high error rates.... Modem is a Innbox V50-U



any ideas? Put on a faulty port or faulty modem? I would assume even though the modem might not be reading the Error rates propperly, surely the port does...

UncleArthur: Weirdness going on with my fritzbox tonight.

I had adjusted the SNR on my fritzbox from 12db to 7db, and this had increased my downstream speed from 35mb/s to 43mb/s..... life has been fine on that setting for about a month, unrecoverable errors per minute sitting on about 4, and DLM-2 profile.... I was happy with this.

Then at 6.20pm tonight, the fritzbox did a resync.
From then on, regardless of what I set the downstream margin offset to, it connects with an SNR of 12db, and a line sync of 35mb.

Not the end of the world, just annoying and unexplainable.