Chorus VDSL - Vectoring & G.INP rolling in

Forums › New Zealand Broadband › Chorus VDSL - Vectoring & G.INP rolling in

1 | ... | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | ... | 27

'That VDSL Cat'
13036 posts

Uber Geek
+1 received by user: 3896

ID Verified

Trusted

Lizard Networks

Subscriber

#2016342 15-May-2018 15:14

Shrapz:

Saw this on the chorus document about who will benefit from the vectoring upgrade

"Existing ADSL customers who can upgrade to the faster more stable vectored VDSL connection."

Is this implying that the reach for VDSL will be improved and those who currently can only get ADSL will potentially be able to get VDSL?

Or is this just a blurb about those who have access to VDSL now, will have access to a faster VDSL if they were to change?

Looking for any signs of hope of getting off my 12mbit adsl connection

@chorusnz may be best to advise on this one since it's their content....

I'd logically say yes it can improve things.

#include <std_disclaimer>

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.

AidanP

76 posts

Master Geek
+1 received by user: 10

#2016350 15-May-2018 15:31

I've now tried 2 modems one being the NF4V and the other being ASUS DSL-AC56U, both showing no signs of vectoring or g.inp being enabled. Any help? My cabinet is TAW/AC

mercutio

1392 posts

Uber Geek
+1 received by user: 134

#2016352 15-May-2018 15:34

AidanP: I've now tried 2 modems one being the NF4V and the other being ASUS DSL-AC56U, both showing no signs of vectoring or g.inp being enabled. Any help? My cabinet is TAW/AC

was the nf4v plugged in this morning? it may be that you were detected as not supporting vectoring. i have no idea if the asus supports vectoring, but i have vectoring working on nf4v since 4 am.

AidanP

76 posts

Master Geek
+1 received by user: 10

#2016357 15-May-2018 15:39

mercutio:
AidanP: I've now tried 2 modems one being the NF4V and the other being ASUS DSL-AC56U, both showing no signs of vectoring or g.inp being enabled. Any help? My cabinet is TAW/AC

was the nf4v plugged in this morning? it may be that you were detected as not supporting vectoring. i have no idea if the asus supports vectoring, but i have vectoring working on nf4v since 4 am.

I had the Asus plugged in with the vectoring settings enabled, but only recently plugged the NF4V in to see if I could get it to sync with vectoring enabled but that didn't happen.

mercutio

1392 posts

Uber Geek
+1 received by user: 134

#2016358 15-May-2018 15:42

AidanP:
mercutio:

AidanP: I've now tried 2 modems one being the NF4V and the other being ASUS DSL-AC56U, both showing no signs of vectoring or g.inp being enabled. Any help? My cabinet is TAW/AC

was the nf4v plugged in this morning? it may be that you were detected as not supporting vectoring. i have no idea if the asus supports vectoring, but i have vectoring working on nf4v since 4 am.

I had the Asus plugged in with the vectoring settings enabled, but only recently plugged the NF4V in to see if I could get it to sync with vectoring enabled but that didn't happen.

well it's supposed to support vectoring. i wonder if anyone else has that modem and has vectoring working.

hio77

'That VDSL Cat'
13036 posts

Uber Geek
+1 received by user: 3896

ID Verified

Trusted

Lizard Networks

Subscriber

#2016410 15-May-2018 16:22

AidanP: I've now tried 2 modems one being the NF4V and the other being ASUS DSL-AC56U, both showing no signs of vectoring or g.inp being enabled. Any help? My cabinet is TAW/AC

21/05/2018 23:00 - 6.00

https://fusiontables.google.com/embedviz?q=select+col1+from+1QgdntIT1FQg_QPMuYzCa8xxf2S-_Z47v6G5H416q&viz=MAP&h=false&lat=-38.27652810459545&lng=176.0489793701172&t=1&z=7&l=col1&y=2&tmplt=2&hml=TWO_COL_LAT_LNG

Please see previous map, Chorus aren't toggling everyone at once.

#include <std_disclaimer>

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.

Mighty Ape

Shop now at Mighty Ape (affiliate link).

MichaelNZ

1594 posts

Uber Geek
+1 received by user: 485

Trusted

Net Trust Ltd

#2016415 15-May-2018 16:27

hio77:

Please see previous map, Chorus aren't toggling everyone at once.

Thanks for that. Is this just the cabinets? I note our exchange placed ISAM is missing but the cabinet along the road is showing.

WFH Linux Systems and Networks Engineer in the Internet industry | Specialising in Mikrotik | APNIC member | Open to job offers | ZL2NET

AidanP

76 posts

Master Geek
+1 received by user: 10

#2016416 15-May-2018 16:27

hio77:

AidanP: I've now tried 2 modems one being the NF4V and the other being ASUS DSL-AC56U, both showing no signs of vectoring or g.inp being enabled. Any help? My cabinet is TAW/AC

21/05/2018 23:00 - 6.00

https://fusiontables.google.com/embedviz?q=select+col1+from+1QgdntIT1FQg_QPMuYzCa8xxf2S-_Z47v6G5H416q&viz=MAP&h=false&lat=-38.27652810459545&lng=176.0489793701172&t=1&z=7&l=col1&y=2&tmplt=2&hml=TWO_COL_LAT_LNG

Please see previous map, Chorus aren't toggling everyone at once.

It says the 14th of may

hio77

'That VDSL Cat'
13036 posts

Uber Geek
+1 received by user: 3896

ID Verified

Trusted

Lizard Networks

Subscriber

#2016420 15-May-2018 16:40

Derp.

i looked up TAW/C!

There was no service drop on linecard, that would tell me change on profiles didnt happen.

Double digit examples on this side indicating DSLAM has fallen back to non vectored state.

This error implys modem compatibility and/or linecard.

in this case, i suspect line card.

I've also seen this happen with other areas, being that it was part of the trail never actually had a answer to the reason for it happening.

#include <std_disclaimer>

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.

AidanP

76 posts

Master Geek
+1 received by user: 10

#2016423 15-May-2018 16:50

hio77:

Derp.

i looked up TAW/C!

There was no service drop on linecard, that would tell me change on profiles didnt happen.

Double digit examples on this side indicating DSLAM has fallen back to non vectored state.

This error implys modem compatibility and/or linecard.

in this case, i suspect line card.

I've also seen this happen with other areas, being that it was part of the trail never actually had a answer to the reason for it happening.

Thats disappointing :( So what happens with regard to that?

hio77

'That VDSL Cat'
13036 posts

Uber Geek
+1 received by user: 3896

ID Verified

Trusted

Lizard Networks

Subscriber

#2016424 15-May-2018 16:56

maybe they fix it at the end? a final cleanup?

who knows, i see no notifications on that work yet.

#include <std_disclaimer>

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.

Lego

Shop now for Lego sets and other gifts (affiliate link).

BMarquis

466 posts

Ultimate Geek
+1 received by user: 581

Trusted

Chorus

Lifetime subscriber

#2016454 15-May-2018 18:38

Hi guys,

TAW_AC was 1 of a small group (8 DSLAMs) which didn't have vectoring enabled as planned last night.
These 8 ISAMs were picked up by the deployment tool as having a hardware or software issue which prevented the switch on of Vectoring.

Due to planned work notification lead times, these will be added to some kind of wash-up night at the end of the deployment.

nickt

94 posts

Master Geek
+1 received by user: 10

#2016661 16-May-2018 09:41

Vectoring and G.INP was enabled on my suburban line last night. As expected a mixed bag, with downstream improving from 105 to 121 Mbps, but upstream of 46 dropping to 29.3 Mbps (aka exactly 30000 kbps). Pity about the upstream clamp but I guess others will appreciate their downstream boost more.

wratterus

1687 posts

Uber Geek
+1 received by user: 678

#2016663 16-May-2018 09:45

nickt: Vectoring and G.INP was enabled on my suburban line last night. As expected a mixed bag, with downstream improving from 105 to 121 Mbps, but upstream of 46 dropping to 29.3 Mbps (aka exactly 30000 kbps). Pity about the upstream clamp but I guess others will appreciate their downstream boost more.

That's actual downstream or attainable downstream?

coffeebaron

6304 posts

Uber Geek
+1 received by user: 3567

Trusted

Lifetime subscriber

#2016667 16-May-2018 09:52

Before

Rural IT and Broadband support.

Broadband troubleshooting and master filter installs.
Starlink installer - one month free: https://www.starlink.com/?referral=RC-32845-88860-71
Wi-Fi and networking
Cel-Fi supply and installer - boost your mobile phone coverage legally

Need help in Auckland, Waikato or BoP? Click my email button, or email me direct: [my user name] at geekzonemail dot com

1 | ... | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | ... | 27