VDSL Performance & Tuning

Forums › New Zealand Broadband › VDSL Performance & Tuning

1 | ... | 233 | 234 | 235 | 236 | 237 | 238 | 239 | 240 | 241 | 242 | 243 | ... | 285

'That VDSL Cat'
13036 posts

Uber Geek
+1 received by user: 3896

ID Verified

Trusted

Lizard Networks

Subscriber

#1203556 25-Dec-2014 10:14

Sounds like DLM is doing its job!

#include <std_disclaimer>

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.

JamesL

956 posts

Ultimate Geek
+1 received by user: 342
Inactive user

#1203800 25-Dec-2014 22:30

Sure is.

I'm just looking forward to that latency coming down, got too used to 4ms on the first hope with Snap

JamesL

956 posts

Ultimate Geek
+1 received by user: 342
Inactive user

#1205399 29-Dec-2014 11:26

Spark connection settled on 37mbit, DLM1 now

JamesL

956 posts

Ultimate Geek
+1 received by user: 342
Inactive user

#1206962 1-Jan-2015 19:34

Load balanced the connections now, using pfsense

hio77

'That VDSL Cat'
13036 posts

Uber Geek
+1 received by user: 3896

ID Verified

Trusted

Lizard Networks

Subscriber

#1206964 1-Jan-2015 19:41

JamesL: Load balanced the connections now, using pfsense

very nice!

#include <std_disclaimer>

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.

Psilan

860 posts

Ultimate Geek
+1 received by user: 94

#1206970 1-Jan-2015 20:16

What's with the upload speed?

Voyager referral - https://refer.voyager.nz/68QKJ8XKK

Geekzone

Want to support Geekzone and browse the site without the ads? Subscribe to Geekzone now (monthly, annual and lifetime options).

Jase2985

13735 posts

Uber Geek
+1 received by user: 6217

ID Verified

Lifetime subscriber

#1206973 1-Jan-2015 20:22

Psilan: What's with the upload speed?

2x 33/10 vdsl connections load balanced

Psilan

860 posts

Ultimate Geek
+1 received by user: 94

#1206974 1-Jan-2015 20:23

Jase2985:
Psilan: What's with the upload speed?

2x 33/10 vdsl connections load balanced

Ah sorry, couldn't find that part. Thanks :)

Voyager referral - https://refer.voyager.nz/68QKJ8XKK

JamesL

956 posts

Ultimate Geek
+1 received by user: 342
Inactive user

#1207014 1-Jan-2015 22:18

Yeah, in case anyone's wondering; The Spark connection is free given my wife works at Spark, otherwise I wouldn't bother doing this :p

mattgreen

133 posts

Master Geek
+1 received by user: 6

#1211670 10-Jan-2015 18:51

Quick update on firmware 6.20 on 7390. This version has almost fixed my issues with the Broadcom line card I'm on.

On 5.x and 6.x prior to this I managed to get back to DLM1 by sliding the SNR slider to max stability but was only syncing at 29Mb (down from 43Mb before we were randomly moved off an Ikanos line card). Even still, the error rate was up and down and I've been yo-yo-ing up and down DLM profiles for months before I ended up on DLM1.

With 6.20 my CRC errors dropped to 0 so I tried sliding back to max-stability. Now syncing at 34.8Mb with 0.48 CRC per min. Fingers crossed it stays this way over the next few days!

Lewk

572 posts

Ultimate Geek
+1 received by user: 256

Trusted

dns4me

Lifetime subscriber

#1217022 18-Jan-2015 17:23

I have recently purchased a Fritzbox 7490 from Australia. I have it working with my Vodafone VDSL connection no problem. Bought it so that I could do a bit of tweaking to see if I could improve my download speeds. I have been trying (unsuccessfully) to reduce my SNR from 12 to say 8 to see if that increases my download speed. I have followed instructions from the first 4/5 pages of this forum topic but each time I try to save the changes, I get the message "

Restore settings failed!

A problem occurred while restoring the settings.

The specified file is not a valid import file.

I have tried the various ways of changing the "downStreamMarginoffset" as suggested in the posts but each time it fails to load the cfg file. I am running on 06.20

Any ideas on how I can apply this tweak or what I might be doing wrong?

Dyson

Shop now for Dyson appliances (affiliate link).

Frontliner

67 posts

Master Geek
+1 received by user: 5

#1230819 3-Feb-2015 21:59

Got VDSL with Orcon installed thursday in Newtown, so using the NF4V. The tech replaced the splitter and sync increased from 19/10 to 25/10. Haven't really experienced any changes to the sync other than a slight drop of 0.2mbit. Anything out of the ordinary in my line stats? I understand that 20.7 dB isn't the greatest but pleased with 25/10 if it stays that way. Can't tell what DLM profile I'm on.

hio77

'That VDSL Cat'
13036 posts

Uber Geek
+1 received by user: 3896

ID Verified

Trusted

Lizard Networks

Subscriber

#1230863 4-Feb-2015 01:41

DLM-6, an odd one though 8-4

#include <std_disclaimer>

Any comments made are personal opinion and do not reflect directly on the position my current or past employers may have.

Jase2985

13735 posts

Uber Geek
+1 received by user: 6217

ID Verified

Lifetime subscriber

#1231141 4-Feb-2015 14:41

hio77: DLM-6, an odd one though 8-4

Yea

Frontliner: you can use this table to work out where you are for DLM

https://i.imgur.com/ErY158C.png

you just use the delay and INP from your modem stats

Athlonite

1828 posts

Uber Geek
+1 received by user: 210
Inactive user

#1231320 4-Feb-2015 19:07

Frontliner: Got VDSL with Orcon installed thursday in Newtown, so using the NF4V. The tech replaced the splitter and sync increased from 19/10 to 25/10. Haven't really experienced any changes to the sync other than a slight drop of 0.2mbit. Anything out of the ordinary in my line stats? I understand that 20.7 dB isn't the greatest but pleased with 25/10 if it stays that way. Can't tell what DLM profile I'm on.

If you look at the very first page that opens when you log in to your router it will tell you there which profile your on like me you look to be on 8b

1 | ... | 233 | 234 | 235 | 236 | 237 | 238 | 239 | 240 | 241 | 242 | 243 | ... | 285