Problems using SE HBH-35 headset with DBT-120 widcomm drivers

Forums › LAN (ethernet/Wifi/routers/Bluetooth) › Problems using SE HBH-35 headset with DBT-120 widcomm drivers

1 | 2

neophred

34 posts

Geek

#6094 27-May-2004 19:50

No internal modem, just checked and only modems installed are BT and BT fax on COM5 and COM6.
When I try to connect the BT symbol turns green for a minute and the 3650 also shows a connect symbol but the m-router never changes in connect mode and then the connection is lost.

freitasm

BDFL - Memuneh
79288 posts

Uber Geek

Administrator

ID Verified

Trusted

Geekzone

Lifetime subscriber

#6095 27-May-2004 19:58

Nope, shouldn't use COM0 at all. Something strange there.

neophred

34 posts

Geek

#6096 27-May-2004 20:13

Could we try to fix it together using MSN ? I'll do a recap on the forum when and if we fix it ?

neophred

34 posts

Geek

#6098 27-May-2004 20:23

It should work really as before I reinstalled the nokia suite I managed to send all my pictures from the 3650 to my PC using the File Transfer without Nokia suite.
It all worked like a charm.

freitasm

BDFL - Memuneh
79288 posts

Uber Geek

Administrator

ID Verified

Trusted

Geekzone

Lifetime subscriber

#6099 27-May-2004 20:24

There are a few other things you can try. Make sure your Bluetooth Serial port is not configured to use Secure Connection. And check that guide I've posted before, again. It's pretty much how it should be configured to work. If it doesn't work well, then it's something on this specific Windows configuration. In this case is pretty much out of my hands, even with MSN.

neophred

34 posts

Geek

#6100 27-May-2004 20:40

HURRAH !! Victory !! It was the secure connection I needed to uncheck and now it works perfectly.
Thanks a million freitasm, you made my day !
Thanks to your help and advice I finally got it to work.
THANKS AGAIN
Fred

freitasm

BDFL - Memuneh
79288 posts

Uber Geek

Administrator

ID Verified

Trusted

Geekzone

Lifetime subscriber

#6101 27-May-2004 20:55

Wow... Great sutff. And quite a long thread for that. Next time someone asks I'll ask this first.

Sharesies

Trade NZ and US shares and funds with Sharesies (affiliate link).

neophred

34 posts

Geek

#6108 28-May-2004 02:39

Oops ! Think I screamed victory a little too soon as I get the same problem again now, although my secure connection is turned off.
This is really strange considering it worked perfectly for some time until I disconnected the BT and then tried to reconnect later. It must be a small problem in my BT config but does can be hard to find.
Fact is that I still have 2 BT Serial Ports in my Local Services (COM3 and 7) as I didn't want to erase COM7 since it now worked. I don't know which COM port is being used and still get the COM0 message as befiore. Should I erase the COM7 Serial Port ?

freitasm

BDFL - Memuneh
79288 posts

Uber Geek

Administrator

ID Verified

Trusted

Geekzone

Lifetime subscriber

#6111 28-May-2004 07:26

You can erase the COM7, and make sure mRouter is set to listen on the other port.

neophred

34 posts

Geek

#6203 1-Jun-2004 01:35

Thanks again, it works now !
Off to California ?

1 | 2