MagicTV 3700TD - Opinions

Forums › Freeview (DVB-T/DVB-S) › MagicTV 3700TD - Opinions

1 | ... | 14 | 15 | 16 | 17 | 18 | 19 | 20

2 posts

Wannabe Geek
Inactive user

#938747 22-Nov-2013 01:56

HI Jimmy,

seems it does not record series unfortunately
but the app is really cool - it has all the necessary features -browsing, a nice EPG, scrolling with simple hand gestures.
I like it very much

Jimmy22

377 posts

Ultimate Geek
+1 received by user: 40

#938814 22-Nov-2013 09:33

with a series record and storage and energy star compliance that box indeed be a no brainer , but with out those it lacks key features for me unfortunately.

if those featutes were added to a PVR it would be utterly fantastic

HiroProtagonist

47 posts

Geek
+1 received by user: 2

#944280 2-Dec-2013 18:16

Since the most recent firmware upgrade I have noticed an EPG issue.

Canterbury TV guide is gone & is replaced with TVHB guide. [We are in Canterbury].

wklie

191 posts

Master Geek
+1 received by user: 5

Trusted

MagicTV

#944883 3-Dec-2013 17:45

HiroProtagonist: Since the most recent firmware upgrade I have noticed an EPG issue.

Canterbury TV guide is gone & is replaced with TVHB guide. [We are in Canterbury].

All versions of firmware since April 22, 2013 used the same MHEG engine to run the EPG. The described EPG issue is very unlikely to be caused by a firmware change.

Please try to do a factory reset. If problem persists, you may consult Dish TV, our distributor, and/or ask Freeview and the broadcaster.

LUMIN Network Music Player, Magic TV New Zealand and Australia firmware lead

HiroProtagonist

47 posts

Geek
+1 received by user: 2

#947116 7-Dec-2013 15:52

wklie: Please try to do a factory reset. If problem persists, you may consult Dish TV, our distributor, and/or ask Freeview and the broadcaster.

OK, will try that. I have another freeview box in the house that doesn't have this problem.

cb1

339 posts

Ultimate Geek
+1 received by user: 44

#947285 7-Dec-2013 21:25

HiroProtagonist: Since the most recent firmware upgrade I have noticed an EPG issue.

Canterbury TV guide is gone & is replaced with TVHB guide. [We are in Canterbury].

There must have been some issue with transmission - my 3600 in Auckland auto tuned to TVHB on channel 48, but when I tried that channel, just got the 'No signal' message. I deleted it and it has't returned.

HP

Shop now for HP laptops and other devices (affiliate link).

HiroProtagonist

47 posts

Geek
+1 received by user: 2

#948016 9-Dec-2013 13:19

wklie: Please try to do a factory reset. If problem persists, you may consult Dish TV, our distributor, and/or ask Freeview and the broadcaster.

A factory reset fixed the problem, however the spousal unit was none too pleased to have to re-enter all her recordings.

Another problem that has been around for a while - sometimes after you fast-forward, when you press 'play' you get stuck in a ~30-second loop, and have to jump forward or back to get out of it. Very annoying when that happens.

nickt

94 posts

Master Geek
+1 received by user: 10

#948023 9-Dec-2013 13:29

Another problem that has been around for a while - sometimes after you fast-forward, when you press 'play' you get stuck in a ~30-second loop, and have to jump forward or back to get out of it. Very annoying when that happens.

I've seen this problem on the 3600 model too, mostly on Prime but that might just be what we're recording. Try pressing the play button again.

Yay for randomly stabbing the remote in frustration.

Jimmy22

377 posts

Ultimate Geek
+1 received by user: 40

#948056 9-Dec-2013 13:56

same issue also on prime mostly , frame rate issue ? i rewind and play again to solve that... worst ever was having to rewind 15 mins of recording, finally got it to go and left it there till the end.. no playback issue, just a resynk? issue if i fast forward. AND NOW no sound unless i pause and play on occasion.

Great if prime went HD huh ?

HiroProtagonist

47 posts

Geek
+1 received by user: 2

#951639 13-Dec-2013 14:07

HiroProtagonist:
wklie: Please try to do a factory reset. If problem persists, you may consult Dish TV, our distributor, and/or ask Freeview and the broadcaster.

A factory reset fixed the problem, however the spousal unit was none too pleased to have to re-enter all her recordings.

A few days later the problem has returned. I'll see if I can find anyone at Freeview who cares...

wklie

191 posts

Master Geek
+1 received by user: 5

Trusted

MagicTV

#951658 13-Dec-2013 14:33

HiroProtagonist:
A few days later the problem has returned. I'll see if I can find anyone at Freeview who cares...

Instead of doing a factory reset, perhaps you may try doing an Autoscan Channel. This step will not clear the bookings in To-Do List.

LUMIN Network Music Player, Magic TV New Zealand and Australia firmware lead

Dyson

Shop now for Dyson appliances (affiliate link).

Morgenmuffel

639 posts

Ultimate Geek
+1 received by user: 58

Lifetime subscriber

#953851 17-Dec-2013 17:49

HiroProtagonist:
HiroProtagonist:
wklie: Please try to do a factory reset. If problem persists, you may consult Dish TV, our distributor, and/or ask Freeview and the broadcaster.

A factory reset fixed the problem, however the spousal unit was none too pleased to have to re-enter all her recordings.

A few days later the problem has returned. I'll see if I can find anyone at Freeview who cares...

I had the same thing with Hawkes Bay TV appearing in the listing (but not working) and Central TV missing (I'm in south Waikato), I just did a rescan and it fixed the epg so central appears and hawkes bay is gone, so try a rescan rather than a reset, i'd hate to have to redo all my recording setups

'We love to buy books because we believe we’re buying the time to read them.' WARREN ZEVON

Morgenmuffel

639 posts

Ultimate Geek
+1 received by user: 58

Lifetime subscriber

#953855 17-Dec-2013 18:10

Ah and the reason I came here in the first place, am I able to access my MagicTV using my PC over the network to watch recordings,

'We love to buy books because we believe we’re buying the time to read them.' WARREN ZEVON

Morgenmuffel

639 posts

Ultimate Geek
+1 received by user: 58

Lifetime subscriber

#953887 17-Dec-2013 19:00

And thats even more depressing, my unit is saying HDD Full, and it isn't it should be only half full, at least thats what the graphic next to it shows

Hopefully that image shows up

'We love to buy books because we believe we’re buying the time to read them.' WARREN ZEVON

wklie

191 posts

Master Geek
+1 received by user: 5

Trusted

MagicTV

#953914 17-Dec-2013 20:03

Morgenmuffel: And thats even more depressing, my unit is saying HDD Full, and it isn't it should be only half full, at least thats what the graphic next to it shows

1. Please empty the trash folder in Recorded Programme List
2. Please perform Settings -> Recording -> Advanced -> Check and Repair System HDD
3. If you don't need timeshift, turn it off in Settings -> Timeshift -> Instant Rewind

LUMIN Network Music Player, Magic TV New Zealand and Australia firmware lead

1 | ... | 14 | 15 | 16 | 17 | 18 | 19 | 20